I'm starting on attempting this myself. 2022 regular cab UC5 8.4 with nav. Alpine system but no amp under the driver seat. I'm going to use a non amplified wire kit, pac lpa 2.2, skar 1200.1 amp, and 2 12 inch kenwood shallow mount subs in the back. Worried I'm going to run into trouble with...
OK guys, i have done my research, and after reading 30 page long threads I can not find anyone that has done this to completion and given any sort of results. Has anyone here swapped a 6.4 vvt cam into there 5.7 vvt engine yet? I have a varam and bbk shorties on the way (Thanks Matt!), and a 6.4...
Did you use stock valve Springs with the 6.4 cam in your truck? I've been wanting to do this swap for a while but I havn't seen anyone with a truck do it yet.
You know I always triple check because I have a habit of not paying attention and it just looks way to easy to do. It's amazing in the world where we print caution :contents of cup are hot on a coffee cup there isn't more of a safeguard in place, other than the windshield wiper emblem on the...
Check out torque in the Google play store if you have an android phone or tablet. If it does what you need then the only other thing you would need is a cheap bluetooth obd2 adapter. I used to have a scanner I paid big money for, now this does everything it did and more for under thirty dollars.
It will show you a failed head gasket sometimes.they fail in different ways a shop can do a full leak down test on that cylinder and give you a lot of good info a regular compression check wont.
Pull that valve cover and take a look. Springs could be good but still could be a bent pushrod bent valve or collapsed lifter. See if the rods have any play.turn it over by hand and watch the rocker arms going up and down. Not much left to look at. Pull the radiator cap and start the motor.see...
Yeh could put a plug in the coil removed but plugged in, and try to spark it against something metal and unpainted. Have someone start the truck, wear a glove (dry) or it will zap you pretty good. If that works and you have voltage at the injector safe bet it's the PCM.
Set it for vdc should have power at the injector plug with they key on. I'm not positive it will on these trucks though, so verify whatever you find with another one. Use a chassis ground not the negative in the plug.
Only thing left I can think of is checking for power at the injector. Should be always hot, I'm pretty sure the ecu switches the ground side off and on to actuate it. How did those injector seals look? Checked vacuum lines already? I would pull the valve cover and watch as someone turns the...
I have a 14 si/so on my 13 rcsb and have no drone. It wasn't nearly loud enough I just took the resonator and tailpipe off and put a 45degree turndown in its place. Much better sounding now and no drone still though mds sounds so crappy I just leave it in 6 on the highway.
Same thing after first oil change didn't notice it until I investigated my driveway and saw the filter and steering rack was covered in oil. Changed my own oil after with Mobil 1 filter and royal purple. The filter was deffinately not tight when I took it off. 2k on this filter no leaks. I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.