Recent content by tbowers391

  1. T

    What the heck is this?

    I didn’t have the windsheild replaced but just got Alfa obd and checking things out I hit the “realign high beam” function because I didn’t even know I had that option, but I was parked in the garage so it might have thrown them off?
  2. T

    What the heck is this?

    I’ve got no air bag warning light. But this might be the case? I like bosshog’s answer, I didn’t have the windsheild replaced but when I just got obd and checking things out I hit the “realign high beam” function because I didn’t even know I had that option, but I was parked in the garage so...
  3. T

    What the heck is this?

    For sure a little circle there and then a light coming from behind it. Can see the little circle where there is no mirror there when the light is off too. You can see in the photo even the bulb is behind there and it even shines through some of the mirror to the left of the circle.
  4. T

    What the heck is this?

    Let’s try this. Has it always been there? Lol
  5. T

    What the heck is this?

    No bro. The red light at the top of the mirror. It flashes slowly. Not the 911 button
  6. T

    What the heck is this?

    Updated my software the other day and noticed this red light blinking in my rear view mirror that night. It’s still blinking, I’ve never noticed it before. What the heck is it and what does it mean? Couldn’t figure out how to upload the video so here’s a screenshot. It’s slowly blinking.
  7. T

    FOB PROGRAM HELP

    Ok how about this, I am also getting codes in the body control module. My right side blinkers, tail and headlights keep signaling they are out but work fine. Checking into the codes it looks like U0147 can have something to do with a problem with the CAN bus circuit and different modules...
  8. T

    FOB PROGRAM HELP

    how would one test all functions besides just physical observation of connections and antennae? You would think if it’s Rf hub failure it would just not pair to begin with, or not notice the fob after some time. This only happens after 1 startup and drive. I could pull the other new fob out...
  9. T

    FOB PROGRAM HELP

    Thanks bro, but unfortunately no functions work anymore. No lock, unlock, or push to start. Only thing that works is using my old dead fob to press the start button with the fob. I have my original key that if for some reason I do decide to lock my doors, I can use it to open the door. Then I...
  10. T

    FOB PROGRAM HELP

    Yea that’s what I meant I cleared ALL codes already. The B1A0B/C codes come right back as soon as you press a button on new fob again. And yea I also cleared them and tried to add them and it told me they are already programmed and can’t be reprogrammed. I’ve returned and gotten two brand new...
  11. T

    2011 RAM: Key fob programming... only eight keys can be made?

    If you delete old key pairs will it delete all keys? Including a fob that is currently dead and only works when pressing the start button with fob? My Og fob but the dust, only works when pressing the start button WITH the actual fob. I guess it had 3 fobs already programmed (I only had 2 but...
  12. T

    AlfaOBD programmed a replacement Key fob ok but it stopped working

    How did this workout? Same exact problem with mine. 4 fobs all fail after 1 single drive. I got these codes in Rf hub, and after clearing them they wouldn’t show again until I hit a fob button again. And new code for each new fob I tried. This last time I sat in truck a bit and all my dash...
  13. T

    FOB PROGRAM HELP

    Ok, I’ve cleared the 100 and 101 codes and they do not read now. I thought I had done this before but I guess I did not. Now my only codes in the RF Hub are the fob codes B1A0B and B1A0C. Which with my research so far only points to • Excessive press from Keyless Entry Fob (RKE) transmitter...
  14. T

    FOB PROGRAM HELP

    Scratch that, I just checked that plug it again to refresh my memory. It’s fine and it takes some effort to unplug it. It was the I guess locking portion of the tab for the red handle/locking mechanism. Plug snaps in good, then you pull down on the red locking handle/tab whatever you want to a...
  15. T

    FOB PROGRAM HELP

    I don’t believe so, but I will say I unplugged one of the large plugs to the PCM I believe and of course it wouldn’t snap back in super well. If feels like it’s in there but seemed like one of the plastic pieces wore out or snapped a bit because it doesn’t snap. It’s been a few weeks I’ll check...
See more

Latest posts

Staff online

Members online

... and 16 more.
Total: 1,187 (members: 66, guests: 1,121)
Robots: 1,456

Forum statistics

Threads
196,130
Posts
2,878,286
Members
157,208
Latest member
Oleggmn

Share this page

Top