motmcd
Member
Replaced alternator and cleaner evaporator coil.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I had a 22" Magnaflow and switched it to a 14" Magnaflow.Ordered a 18" magnaflow. Was gonna go with black widow but really just want to quiten it down a good bit.
Currently have the bolt in Carven Competition exhaust gonna sell.
Yes..pics,So far this week, all I have done is drive to work. Plan on driving back home this afternoon! However, over this past weekend, I did drive to a buddies house and we ran speaker wire on his pontoon boat and got the speakers hooked up! Probably had a couple too many beers also.
Last week I plasti dipped the RAM on the grill and my antenna.
I had a 22" Magnaflow and switched it to a 14" Magnaflow.
It sounds sweet!
And from a standstill at WOT, it barks nicely on the 1-2 and 2-3 shifts.
The 3-4 & 4-5 shifts are super nice as well.
You really want to see pics of probably had a couple too many beers?!
Stick with the Magnaflow is my $0.02...I almost thought about the 14" but I guess I'm getting old and I'm on my phone alot in my truck.
Instead of the magnaflow I'm almost thinking about sending it back and getting the Blackwidow 300
Thanks, Brother!@CanuckRam1313 Ram, for the grill, I popped the hood, removed the plastic cover that has 6 plastic clips on it, placed a piece of cardboard between the grill and radiator, taped off around the letters and applied 3 coats (regular spray) going light to heavy. For the antenna, I hung it in the garage with cardboard on the floor, sprayed (same 3 steps).
No problem at all!!Thanks, Brother!
Got the magnaflow put on. SOOO much better than the carven progressive bolt on. Gonna throw it up for sale on facebook
I keep thinking of doing something different as well. I went from the progressive to a black widow 10". The black widow sounded amazing, but the drone was horrible. I swapped that for the magnaflow drop in. I miss the sound of the carven and black widow, the drone with the magnaflow isn't near as bad, it's totally bearable and didn't have any issues after driving from PA to key west and back. But I miss the rumble of the other mufflers. Stock with a cutout seems like a reasonable option, but I'd rather not mess with a cutout of I don't need to. The mbrp drop in seems reasonable but have no idea how the drone would be.I went from a Carven Progressive to a Flowmaster FlowFX for the same "Getting old" reason. After long tubes and offroad Y pipe the Carven was WAY too loud for my liking. I have thought about actually tracking down another stock muffler and just adding an electric cutout before it. That way the truck can be nice and quiet when it needs to be, then when I want to let the motor roar, open the cutout. But that requires me to undo all the muffler/resonator work I did to make it sound as good as it does. So I probably won't ever get around to it.
How loud is the “18 ?Ordered a 18" magnaflow. Was gonna go with black widow but really just want to quiten it down a good bit.
Currently have the bolt in Carven Competition exhaust gonna sell.