From 2/4.5 to 4/6 drop

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Bullitt5339

Senior Member
Joined
Jul 5, 2015
Posts
920
Reaction score
514
Location
St Pauls, NC
Ram Year
2004
Engine
3.7
Mine aligned to specs without anything at 5.5" drop in the front. I was prepared to slightly notch the alignment slots on the top, but it wasn't necessary.
 

jotin

Senior Member
Joined
Jun 7, 2016
Posts
428
Reaction score
190
Location
your mom
Ram Year
2003
Engine
5.7
Mine aligned to specs without anything at 5.5" drop in the front. I was prepared to slightly notch the alignment slots on the top, but it wasn't necessary.



With drop spindles? I dropped mine 3" in the front and couldn't get camber in all the way. There's no way without spindles or notching the frame holes. I call BS lol


Sent from my iPhone using Tapatalk
 

Bullitt5339

Senior Member
Joined
Jul 5, 2015
Posts
920
Reaction score
514
Location
St Pauls, NC
Ram Year
2004
Engine
3.7
There's no way to get 5.5" on these trucks without spindles or lower control arms. I have spindles.
 

Demon-HeMi

Senior Member
Joined
Dec 30, 2010
Posts
4,346
Reaction score
3,297
Location
Houston
Ram Year
2003, 2003, 2008, & 2013
Engine
(2) 5.7 HEMI, 3.7, & 3.6
There's no way to get 5.5" on these trucks without spindles or lower control arms. I have spindles.

x2 on that, and for the record yup I have a front end conversion
 
Top