A good solid 2/4 drop

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Colin_5.7

Member
Joined
May 30, 2016
Posts
89
Reaction score
27
Ram Year
2003
Engine
Hemi 5.7
So I installed a 2in leveling kit a while back thinking I was going to use it to go off-roading a lot. But honestly I don't have time (plus it's a 2wd so I would have to bring a friend with a 4x4) so I want to lower it. I would like to put 22in srt10 reps and a 2/4 drop but I don't know much about them. I don't want to rub or have any scraping issues, I am just looking for a good quality product for me and my wallet 2/4 kit, thanks.
f87001ba12176f75be81d9c4393885ed.jpg
(as it sits now)


Sent from my iPhone using Tapatalk
 

Brody57

Senior Member
Joined
Aug 14, 2014
Posts
254
Reaction score
76
Location
Oklahoma
Ram Year
2014 RCSB
Engine
Hemi 5.7
In my opinion there's only two companies out there worth buying their drop kits. That's Belltech and McGaughy's kits. Most guys here run the Belltechs and seem to really like them.
 

jotin

Senior Member
Joined
Jun 7, 2016
Posts
428
Reaction score
190
Location
your mom
Ram Year
2003
Engine
5.7
1ba315131e1b8ddf32d7a101262a7537.jpg


I want to say mine is the Mcgaughys Kit. But I cut my spring a bit more and had a bit more in the rear.

3/5 drop here. I didn't like how it sat at the 2/4 level.


Sent from my iPhone using Tapatalk
 

usaf2006

Senior Member
Joined
Mar 28, 2014
Posts
4,518
Reaction score
1,572
Location
Augusta, GA
Ram Year
2008
Engine
Hemi 5.7
Majority of 4th gens run the beltech, but I'd say most 3rd gens run the mcgaughys kits. Check out their website and you'll see their prices are reasonable for their reputation and quality.
 

Bullitt5339

Senior Member
Joined
Jul 5, 2015
Posts
920
Reaction score
514
Location
St Pauls, NC
Ram Year
2004
Engine
3.7
I would highly suggest getting the Deluxe kit with spindles if you can. Yes, it's more expensive, but you'll never have a single problem with front end geometry and wearing other parts out prematurely.

- From the guy spending a lot of money to replace parts and get the front end geometry back to acceptable levels.
 
Top