Welcome to RAM FORUMS

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

R.L.K.

Senior Member
Supporting Member
Joined
Dec 1, 2013
Posts
12,803
Reaction score
12,500
Location
Bristol , Tn.
Ram Year
2014 4X4 QC Express 6 speed auto 355 differentials
Engine
5.7 Hemi
Ram Harness ,do you have aftermarket harness "T" harness for the remote start express kit ?

I SHOT IT WITH MY P.S.E. EVO MAX !!!!
 

jeepguy_1980

Senior Member
Supporting Member
Joined
Apr 3, 2013
Posts
602
Reaction score
98
Ram Year
2013
Engine
5.7L
What harness are you referring to? The remote start kit from Mopar includes all of the required harnesses.

It has a harness that runs from the BCM to the hood latch and another that runs from the RFHM to the antenna. Other than that, there shouldn't be any required wires.
 
OP
OP
R.L.K.

R.L.K.

Senior Member
Supporting Member
Joined
Dec 1, 2013
Posts
12,803
Reaction score
12,500
Location
Bristol , Tn.
Ram Year
2014 4X4 QC Express 6 speed auto 355 differentials
Engine
5.7 Hemi
Not positive myself ,I've been reading the body of a remote start thread here on the R.F. and an eBay purchased dball express kit seems to require a t harness that some guys are looking for . And trying to verify if the 13 s& 14s are the same . The total kit is approx $100.00 and lots of guys have already installed and like the kit on 4gen. Rams , but I don't think anyone has installed it on a 2014 yet
Do you know the cost of the Mopar kit for 2014 Ram 1500 5.7 ? And is it a plug N play no splice type kit ?

I SHOT IT WITH MY P.S.E. EVO MAX !!!!
 
OP
OP
R.L.K.

R.L.K.

Senior Member
Supporting Member
Joined
Dec 1, 2013
Posts
12,803
Reaction score
12,500
Location
Bristol , Tn.
Ram Year
2014 4X4 QC Express 6 speed auto 355 differentials
Engine
5.7 Hemi
What harness are you referring to? The remote start kit from Mopar includes all of the required harnesses.

It has a harness that runs from the BCM to the hood latch and another that runs from the RFHM to the antenna. Other than that, there shouldn't be any required wires.

Just tagging you back to the Ram Harness thread ...

I SHOT IT WITH MY P.S.E. EVO MAX !!!!
 

jeepguy_1980

Senior Member
Supporting Member
Joined
Apr 3, 2013
Posts
602
Reaction score
98
Ram Year
2013
Engine
5.7L
I do not have any experience with the D-Ball kit. I could pretty much make a connector for any part of the truck. But most of the connectors and pins all have minimum order quantities, which makes them very expensive.

Even if I made a connector for the truck, I wouldn't know what the D-Ball side of the connector should look like.

Sent from my SCH-I545 using Tapatalk
 

jeepguy_1980

Senior Member
Supporting Member
Joined
Apr 3, 2013
Posts
602
Reaction score
98
Ram Year
2013
Engine
5.7L
The Mopar kit is about $180. And is a no splice kit. I would assume a 13 kit and14 kit are the same. It's highly unlikely that they're different, but I am not positive.

Sent from my SCH-I545 using Tapatalk
 
Top