(SOLD) 09-17 Foglight add-on harness (tow hook)

First up

(SOLD) 68046303AC Foglight Jumper harness
10-17 Ram 2500/3500's with 2pc bumper (ALL)
(“Horizontal” 9145/9005 Foglight bulbs with Dbl Keyed/2 groove connector)

This goes between the foglights within the bumper only. To complete the installation if adding foglights requires a foglight extension harness from M² Mods.
DIY: Add 2013-2017 OEM Foglight Wiring


(SOLD) 2009-2012 Foglight Add-on harness (68045949AA) for adding the foglights at the tow hook spots. This is complete from the PDC to the foglight connectors (9145/9005). New/never used for anything other than measurements for harnesses.

* This harness is most likely NOT long enough to reach the passenger side foglight on an OEM bumper without splicing in an extension. Recommended for use with an aftermarket light mounted in the tow hook spot.

* I am willing to re-pin this harness for free to match the PDC connector on any 13-17 truck, but be aware the bulb connectors only match the factory 2500 trucks. (I have no idea on earlier trucks which pins at the PDC are for the fogs).

Price: $40 shipped



M² Mods - From my non Flammable S7!

GLWS my friend !

FWIW , I can totally Vouch for Mike with M2Mods aka "MPgrimm2 "
As a great guy and fantastic seller here , as I've known him for years here on the forum !

I can't put words in his mouth but I'm sure he would work with the buyer after the sale as far as Qs go ...
R.L.K.

Sent from my SM-G900V using Tapatalk

Sunday bump.

M² Mods - From my non Flammable S7!

TTT

M² Mods - From my non Flammable S7!

Weekend bump

M² Mods - From my non Flammable S7!

Jumper harness is sold. Still have the one piece harness that I can re-pin if needed.

M² Mods - From my non Flammable S7!

Bump

M² Mods - From my non Flammable S7!

2010 harness sold to S0CAL. All gone!

M² Mods - From my non Flammable S7!