sewardmark
Member
Anyone having trouble getting into 4 high or shifting out, mine takes about a 100 pounds of pressure to activate, in gear idling, or rolling any speed foot off gas, it is a 2013 ram 2500 4 x4 hemi
manual shift transfer case
- Thread starter sewardmark
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Brakelate
Senior Member
- Joined
- Aug 13, 2013
- Posts
- 1,236
- Reaction score
- 732
- Location
- South/Central Utah
- Ram Year
- 2018
- Engine
- 6.4 Hemi
That sounds strange. Mine snicks in and out while rolling quite easily.
A little effort when it is a little bound up like after spinning the rear tires and burying them, then going into 4WD. That takes a bit of a tug, but nothing like you are experiencing.
It does like to be rolling little bit though.
Has it done it since new?
Are the wheel / tires stock?
Are they inflated equally, or close to it?
Does it feel the same if the truck is in Park or Neutral and you try to push / pull the lever?
This is travelling in a straight line, correct?
Something is not right. It should not require that much force.
A little effort when it is a little bound up like after spinning the rear tires and burying them, then going into 4WD. That takes a bit of a tug, but nothing like you are experiencing.
It does like to be rolling little bit though.
Has it done it since new?
Are the wheel / tires stock?
Are they inflated equally, or close to it?
Does it feel the same if the truck is in Park or Neutral and you try to push / pull the lever?
This is travelling in a straight line, correct?
Something is not right. It should not require that much force.
sewardmark
Member
It feels like it is a frozen cable, 17 below zero today, going to wait for a warm shop and remove cable, it was shifting in and out with ease, have not crossed deep water, did a body lift kit, but worked fine until it got cold, its got to be bound up in cable, a litle heat and some lube, will see
Brakelate
Senior Member
- Joined
- Aug 13, 2013
- Posts
- 1,236
- Reaction score
- 732
- Location
- South/Central Utah
- Ram Year
- 2018
- Engine
- 6.4 Hemi
17 Below. Well, that might do it. 
Similar threads
- Article
Staff online
-
mikeruSuper Moderator
Members online
- tearza
- Neomoritate
- BLUKTY2
- turkeybird56
- jackjudy3
- ThunderMacqueen
- knightjp
- AZ MARK
- indept
- Daw14
- RamCares
- sleepy hollow
- DanAR
- HEMIMANN
- tidefan1967
- Mfalty24
- OC455
- LoneStarHemi
- Felks32
- Bmags
- NCPowerwagon
- lanzera8426
- Mekcanix
- John Jensen
- Yardbird
- CanRebel
- crackerjack1957
- Chicoblanco
- MOPAR78
- Jimbro
- Southernab
- Ken226
- Wild one
- jc9151
- aintskeered
- mikeru
- markabby
- seafarer
- Ludville1
- nunyabiznes
- CRB357
- RJL1
- Dean2
- FL-RAM
- ric221
- 34787Bob
- BDS10
- WiSH2oo0
- jerry clements
- Robertson0215