What did you do with your 4th Gen this week?

usaf2006 · Nov 24, 2018

Looking at headers. Anyone in south run chrome or non-ceramic headers?

2010 Infantry Vet · Nov 24, 2018

Pull Ya said:
You put it on the dyno yet?????????? LOL
Jay

No but when i get my headers, throttle body and tune done i will. Im not expecting anything special. All i have now is an aem filter and magnaflow catback

2010 Infantry Vet · Nov 24, 2018

Thirty freaking eights :head3:

Ramm5.7 · Nov 24, 2018

Washed it finally inside n out.
Pulled pulsar for a reality check
Just a minor day in the WhytRam life...lol

GIJoe2010 · Nov 24, 2018

Got a Premium Cluster coming from @R.L.K. and got my LED pod foglight mod in today from Altered Off-road.

And an oil change tomorrow

Pull Ya · Nov 24, 2018

2010 Infantry Vet said:
No but when i get my headers, throttle body and tune done i will. Im not expecting anything special. All i have now is an aem filter and magnaflow catback

View attachment 147302

If you dyno after each one of those changes then you can answer half the questions you keep asking about how much difference each mod makes, cause as you say, the dyno is the only real way to see what the increase, if any, would be. Nice wheels and tires by the way
Jay

2010 Infantry Vet · Nov 24, 2018

Pull Ya said:
If you dyno after each one of those changes then you can answer half the questions you keep asking about how much difference each mod makes, cause as you say, the dyno is the only real way to see what the increase, if any, would be.
Jay

Im not the one trying to sell the products. Thats something a retailer should do, to prove how much power they make. Ill bet my truck wont make over 350 rwhp with my mods and tune.

circuitguy · Nov 24, 2018

Picked up a full exhaust system from a 2018 Ram Sport with 50 miles on it. Paid $150 plus shipping to me, not a bad deal. Also picked up a new pair of stainless 5" bolt on exhaust tips to go with the exhaust system. Paid $150 for pair delivered, way cheaper than the Carven and Moe's Performance ones that are $230 a pair plus shipping. Thinking about powder coating the exhaust and the new tips. If anyone needs a nearly new pair of factory 4" tips I will be selling these once they arrive.

werdna1977 · Nov 24, 2018

circuitguy said:
Picked up a full exhaust system from a 2018 Ram Sport with 50 miles on it. Paid $150 plus shipping to me, not a bad deal. Also picked up a new pair of stainless 5" bolt on exhaust tips to go with the exhaust system. Paid $150 for pair delivered, way cheaper than the Carven and Moe's Performance ones that are $230 a pair plus shipping. Thinking about powder coating the exhaust and the new tips. If anyone needs a nearly new pair of factory 4" tips I will be selling these once they arrive.

View attachment 147315

View attachment 147316

View attachment 147317

View attachment 147318

View attachment 147319

Where are the 5” tips from?

Statcher1 · Nov 24, 2018

2010 Infantry Vet said:
Im not the one trying to sell the products. Thats something a retailer should do, to prove how much power they make. Ill bet my truck wont make over 350 rwhp with my mods and tune.

350whp will be pushing with 38x13.50s. Those are some heavy ass wheel and tires to be trying to make power with. I’d be happy with the truck if it made that on those tires. And not complain one bit.

Sent from my iPhone using Tapatalk

circuitguy · Nov 24, 2018

werdna1977 said:
Where are the 5” tips from?

Got a buddy that works at a custom exhaust shop, he got them for me. They are the nicest tips I have ever seen for the Ram trucks. I had to have a set. I can get more, do you think anyone here will want a pair?

The only bad thing is that I could not get them in black powder coat. I do have a connection to get them finished in black powder coat but I need to do a few sets to make it worth the cost.

mboymopar · Nov 24, 2018

circuitguy said:
Picked up a full exhaust system from a 2018 Ram Sport with 50 miles on it. Paid $150 plus shipping to me, not a bad deal. Also picked up a new pair of stainless 5" bolt on exhaust tips to go with the exhaust system. Paid $150 for pair delivered, way cheaper than the Carven and Moe's Performance ones that are $230 a pair plus shipping. Thinking about powder coating the exhaust and the new tips. If anyone needs a nearly new pair of factory 4" tips I will be selling these once they arrive.

View attachment 147315

View attachment 147316

View attachment 147317

View attachment 147318

View attachment 147319

Looking great!

shadowhawk · Nov 24, 2018

I cleaned wheels, then rotated them. About 6k miles on the new setup. Then I slid the truck along the basketball hoop pole :banghead:

. I apparently can't have a nice truck.

werdna1977 · Nov 24, 2018

circuitguy said:
Got a buddy that works at a custom exhaust shop, he got them for me. They are the nicest tips I have ever seen for the Ram trucks. I had to have a set. I can get more, do you think anyone here will want a pair?

The only bad thing is that I could not get them in black powder coat. I do have a connection to get them finished in black powder coat but I need to do a few sets to make it worth the cost.

Id be interested in black powder coated ones depending on price. What brand are they?

circuitguy · Nov 24, 2018

werdna1977 said:
Id be interested in black powder coated ones depending on price. What brand are they?

No idea, the box has no writing on it.

I would need to get a few pairs sold to get the cost of powder coating down. Maybe three or four sets would do.

69GWC · Nov 24, 2018

circuitguy said:
Got a buddy that works at a custom exhaust shop, he got them for me. They are the nicest tips I have ever seen for the Ram trucks. I had to have a set. I can get more, do you think anyone here will want a pair?

The only bad thing is that I could not get them in black powder coat. I do have a connection to get them finished in black powder coat but I need to do a few sets to make it worth the cost.

Looks like a nice set and a great price.

usaf2006 · Nov 25, 2018

2010 Infantry Vet said:
Thirty freaking eights

View attachment 147303

So all you have is a 6" lift and Bilsteins up front? No body lift or anything?

Been a while since I've seen anything over 37s on here! They look badass

2010 Infantry Vet · Nov 25, 2018

usaf2006 said:
So all you have is a 6" lift and Bilsteins up front? No body lift or anything?

Been a while since I've seen anything over 37s on here! They look badass

Yep just RC 6" lift and bilsteins set at 2.8
No rubbing and im running 20x12 -44 offset wheels. And the tires barely stick out a quarter inch.

2010 Infantry Vet · Nov 25, 2018

Statcher1 said:
350whp will be pushing with 38x13.50s. Those are some heavy ass wheel and tires to be trying to make power with. I’d be happy with the truck if it made that on those tires. And not complain one bit.

Sent from my iPhone using Tapatalk

Yeah my main concern is being able to cruise in overdrive at 70mph. I didnt build this truck for the track. Gears are the best bang for the buck on a lifted truck before performance mods.

2010 Infantry Vet · Nov 25, 2018

69GWC said:
Looks like a nice set and a great price.

Get me a quote!

What did you do with your 4th Gen this week?

Senior Member

Senior Member

Senior Member

Senior Member

No sh*t, there I was . . .

U.S. MARINE VETERAN

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

MOPAR

Senior Member

Senior Member

Senior Member

Power Wagon

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Forum statistics

Share this page