What did you do with your 4th Gen this week?

ram1500rsm · Apr 5, 2019

I got them at my local Harbor freight, same with the cargo bar
https://www.harborfreight.com/2-pc-14-in-cargo-d-ring-anchor-62756.html

revitupmoto33 · Apr 5, 2019

Used it to drop off “the outside pile” of sheds my brother didn’t want. Made enough off the chalked up whites to pay for a vortex viper to go with his daughters new ruger youth .308. Lucky girl got drawn for a elk tag so we will be getting her all setup.

Jeremiah walker · Apr 6, 2019

I put some weather tech mud flaps on her. Next will be the tailgate assist followed by Bushwacker rocker panels.

Jeremiah walker · Apr 6, 2019

ram1500rsm said:
I got them at my local Harbor freight, same with the cargo bar
https://www.harborfreight.com/2-pc-14-in-cargo-d-ring-anchor-62756.html

I'll have to get some of those myself. What did you use to fasten them down ?

ram1500rsm · Apr 6, 2019

Jeremiah walker said:
I'll have to get some of those myself. What did you use to fasten them down ?

Drilled 1/4 holes, then I used 1/4 x 3/4 stainless steel bolts, I think #10 washers and 1/4 nylon nuts.

shadowhawk · Apr 6, 2019

revitupmoto33 said:
Used it to drop off “the outside pile” of sheds my brother didn’t want. Made enough off the chalked up whites to pay for a vortex viper to go with his daughters new ruger youth .308. Lucky girl got drawn for a elk tag so we will be getting her all setup.

View attachment 161782

dayyyyum! nice shed haul.

hodge-xj · Apr 6, 2019

Gonna be 60* today, gonna make this not look so fugly and get it mounted up

Sent from my SM-N920V using Tapatalk

22hemi13 · Apr 6, 2019

revitupmoto33 said:
Used it to drop off “the outside pile” of sheds my brother didn’t want. Made enough off the chalked up whites to pay for a vortex viper to go with his daughters new ruger youth .308. Lucky girl got drawn for a elk tag so we will be getting her all setup.

View attachment 161782

That’s nice man. So much work to get those and know how

predat-r · Apr 6, 2019

That's one big tire......lol. Now where the he'll is tha trailer.

Sent from my SM-N920P using Tapatalk

shadowhawk · Apr 6, 2019

hodge-xj said:
Gonna be 60* today, gonna make this not look so fugly and get it mounted up

Sent from my SM-N920V using Tapatalk

The blue shawl should give it that final touch of class

2966 · Apr 6, 2019

did a diy rear bumper cutout , was tired of tips been under it

WhiteKnight · Apr 6, 2019

2966 said:
did a diy rear bumper cutout , was tired of tips been under it

View attachment 161851

View attachment 161852

View attachment 161853

That looks sharp!!! Good job!

Sent from my iPhone using Tapatalk

ReefRaider · Apr 6, 2019

Now to wire them.

Pull Ya · Apr 6, 2019

Detailed the truck and top coated it with Polish Angel High Gloss for a Cars and Coffee on Sunday. Just as I finished and went into the house they announced on FB that the event was cancelled because of the possibility of severe thunderstorms tomorrow morning. :banghead:

Jay

ReefRaider · Apr 6, 2019

Pull Ya said:
Detailed the truck and top coated it with Polish Angel High Gloss for a Cars and Coffee on Sunday. Just as I finished and went into the house they announced on FB that the event was cancelled because of the possibility of severe thunderstorms tomorrow morning.
Jay

Always have a plan B

Pull Ya · Apr 6, 2019

Plan "B"------On the porch, drinking beer watching it rain LOL
Jay

Addicted2fishing · Apr 6, 2019

smithwessn said:
I noticed the rear brake pads were getting a little low. Outside face of the rotor didn't look too bad. Cool, quick and easy pad slap. I pull the calipers and find a not so cool rust lip on the inner face of the rotors.

OK, pads and rotors, no biggie. Left side rotor doesn't want to come off. It's loose, but its catching on the parking brake shoes. I back the parking brake adjuster all the way off. Rotor still won't come off. Out comes the hammer. I persuaded the rotor off but the lining on the one shoe came off. Mother F@$&%#. The right side rotor comes off nice and easy. The lining comes off a shoe on that side too. I guess that was a moot point, since I would have done both sides anyway.

Off to the auto parts store. Pads, rotors, parking brake shoes, and parking brake hardware kit. Parking brake was a pain in the ass but I was able to do it without removal the axles. (In my drive way, using just a floor jack and jack stands for lift)

That was yesterday. At least the truck is good to go for the weekend.

(Edit) the truck has 39k on it if you're wondering.

Wait, why would you have to remove axle ???

Sent from my iPhone using Tapatalk

stimpy433 · Apr 6, 2019

Cleaned out the garage and filled up the truck.

hodge-xj · Apr 6, 2019

Took the generic apex rack and tweaked it a bit. It had slip joints and plug style set screws I wasn't a fan of, so.i welded it after I cut the top bars down 4" so it didn't sit as high over the cab. Yaks, **** for the house etc will be much easier now, added 4 extra tie down spots as well. Stole that from ram1500rsm. In the future I'll add some work lights and later down the road more tubes and cross bars to double this as a tent rack and make it more adventure friendly. For now, it's the cliche grandpa rack

Sent from my SM-N920V using Tapatalk

hodge-xj · Apr 6, 2019

shadowhawk said:
The blue shawl should give it that final touch of class

It's actually a mermaid tail blanket! Pizzazzzz my man

Sent from my SM-N920V using Tapatalk

What did you do with your 4th Gen this week?

Senior Member

Senior Member

Junior Member

Junior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

U.S. MARINE VETERAN

Senior Member

U.S. MARINE VETERAN

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Forum statistics

Share this page