09 up step notch install

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
D

DHPmike

Junior Member
Joined
Nov 10, 2010
Posts
22
Reaction score
0
Location
Wylie, Texas
Ram Year
2005
Engine
460
I just added this to the available items for the 09 up Dodge.

09UPRAMPANHARDADJ02.jpg


09UPRAMPANHARDADJ03.jpg


09UPRAMPANHARDADJ04.jpg


Its an adjustable panhard bar kit. It uses a stainless steel center adjuster thats both left and right hand threaded so you can simply loosen the jam nuts and adjust the axle side to side with the turn of a nut. Let me know what you think.
 

WhiteExpress

Senior Member
Joined
Sep 8, 2011
Posts
18,185
Reaction score
3,275
Location
Midland, TX
Ram Year
2004
Engine
5.7 Hemi
Damn! That looks like a great piece! If I go against my prior knowledge and lower this one too, I'll for sure be lookin into an adjustable trac bar. Amazingly looking piece.

Any chance of a nice black powdercoat?
 

BMRbrnSNRbrd

Senior Member
Joined
Dec 9, 2010
Posts
1,411
Reaction score
25
Location
Norman, OK
Ram Year
2010 Dodge Ram 1500 CC Hemi Sport
Engine
5.7 Hemi
That is going to be VERY popular when people find out about it. Nice piece Mike!
 
OP
OP
D

DHPmike

Junior Member
Joined
Nov 10, 2010
Posts
22
Reaction score
0
Location
Wylie, Texas
Ram Year
2005
Engine
460
I am in the process of building my powder coat oven. I used to work at a powder coat place that had an 840 foot conveyor line powder coat system with a 100 foot oven.

I know the system pretty well so I will be offering that soon.

There will be a small change to the production version. I will put the adjuster as close to one end as possible. more pics to come.
 
Last edited by a moderator:

quietpeen

Senior Member
Supporting Member
Joined
Jul 14, 2010
Posts
25,442
Reaction score
3,905
Ram Year
2021 TRX
Engine
Hellcat
looks like nice work
 

WhiteExpress

Senior Member
Joined
Sep 8, 2011
Posts
18,185
Reaction score
3,275
Location
Midland, TX
Ram Year
2004
Engine
5.7 Hemi
Any update on this? I've been checking this thread again and again...
 
Last edited by a moderator:

JB1

Senior Member
TOTM Winner
Joined
Nov 3, 2011
Posts
8,366
Reaction score
7,527
Location
Houston, Texas
Ram Year
2017
Engine
Hemi 5.7
I just added this to the available items for the 09 up Dodge.

09UPRAMPANHARDADJ02.jpg


09UPRAMPANHARDADJ03.jpg


09UPRAMPANHARDADJ04.jpg


Its an adjustable panhard bar kit. It uses a stainless steel center adjuster thats both left and right hand threaded so you can simply loosen the jam nuts and adjust the axle side to side with the turn of a nut. Let me know what you think.

is this available yet?
 

BeBeep

Member
Joined
Sep 1, 2010
Posts
57
Reaction score
7
Ram Year
2010
Engine
5.7 HEMI
Trying to revive this thread. Are these available?
 

WhiteExpress

Senior Member
Joined
Sep 8, 2011
Posts
18,185
Reaction score
3,275
Location
Midland, TX
Ram Year
2004
Engine
5.7 Hemi
You can buy all the components need for making one from a place like Blue Torch Fab.
I highly advise you stay AWAY from Heim joints. They make for a harsh jarring ride.
 
Top