Belltech 4 inch rear drop shocks?

BlkRamRt · Oct 27, 2015

Does anyone know the compressed Height and the extended height? Any help is appreciated. Thanks.

Quicksilver337 · Oct 27, 2015

If you buy the Belltech set they come with the shocks. What I'm planning on doing is buying just the springs and buy the QA1 Front & Rear Shocks. QA1 shocks are superior to the belltech shocks.

QA1 Shocks
Front P/N: TS514
Rear P/N: TS905

BlkRamRt · Oct 27, 2015

I already have the QA1's upfront. only reason I wanted to know is because I've seen people using the 801's and 905's and they are off by almost a couple of inches.

TS905
Compressed Height - 14.87"
Extended Height - 23.87"

TS801
Compressed Height - 13.50"
Extended Height - 21.00"

Quicksilver337 · Oct 27, 2015

BlkRamRt said:
I already have the QA1's upfront. only reason I wanted to know is because I've seen people using the 801's and 905's and they are off by almost a couple of inches.

TS905
Compressed Height - 14.87"
Extended Height - 23.87"

TS801
Compressed Height - 13.50"
Extended Height - 21.00"

Good info...
Some people get the TS905 becuase it's direct fit no moding required

BlkRamRt · Oct 28, 2015

Yeah. those are the ones I am planning on getting since I don't want to go out and find all the parts I need. Im too lazy...LOL

Quicksilver337 · Oct 28, 2015

BlkRamRt said:
Yeah. those are the ones I am planning on getting since I don't want to go out and find all the parts I need. Im too lazy...LOL

Yeah man I hear ya same here...lol

will530 · Oct 29, 2015

What about the rear ground force shocks from there 9863 kit, 2/3 drop. Are the any good? I think you can purchase separately.

BlkRamRt · Oct 29, 2015

will530 said:
What about the rear ground force shocks from there 9863 kit, 2/3 drop. Are the any good? I think you can purchase separately.

Not sure about those but I ended up buying the QA1 TS905's and had them over night them to me.

Quicksilver337 · Oct 29, 2015

BlkRamRt said:
Not sure about those but I ended up buying the QA1 TS905's and had them over night them to me.

that's awesome let us know how they work out for ya

will530 · Oct 30, 2015

Just ordered my 2/4 bell tech drop without shocks. Was just going to leave stock front shocks in and was looking at getting Ground Force 70070 rear nitrogen shocks 22.4 ext 14.04 collapsed. $80 ea.

BlkRamRt · Oct 30, 2015

will530 said:
Just ordered my 2/4 bell tech drop without shocks. Was just going to leave stock front shocks in and was looking at getting Ground Force 70070 rear nitrogen shocks 22.4 ext 14.04 collapsed. $80 ea.

Looks like you will be fine with those in the rear, unless you want more adjustability I would recommend the QA1's. Only down fall is that they are pricey. I paid 344$ shipped to my house for both.

BlkRamRt · Oct 30, 2015

Quicksilver337 said:
that's awesome let us know how they work out for ya

Forsure. I will have them installed by Saturday.

aramos3 · Oct 30, 2015

BlkRamRt said:
Forsure. I will have them installed by Saturday.

+1 I have been wanting these but been putting them off until i can buy them all at once for all four corners.

Dubstep Shep · Oct 30, 2015

BlkRamRt said:
Not sure about those but I ended up buying the QA1 TS905's and had them over night them to me.

If you feel like returning those I have some used 801 shocks I'll sell you with all the extra mounting stuff already done.

Milt IV · Oct 30, 2015

will530 said:
What about the rear ground force shocks from there 9863 kit, 2/3 drop. Are the any good? I think you can purchase separately.

I have the GF shocks from the #9984 (2/3 for 4x4 CC which ends up being 2/4) and I like them so far. I've had several sets of the BT shocks nitro and street performance and even a set of DJMs on several different trucks and I can say this GF setup is far superior. Could be in combination with the springs too though. These GF springs are much better than the BT in my opinion.

BlkRamRt · Oct 30, 2015

Dubstep Shep said:
If you feel like returning those I have some used 801 shocks I'll sell you with all the extra mounting stuff already done.

If one of my shocks was not busted I would have got them off you and I could have waited a bit longer and saved some $ but I need them installed by sat morning because my dad is taking my truck on a trip over the weekend.

BlkRamRt · Oct 30, 2015

aramos3 said:
+1 I have been wanting these but been putting them off until i can buy them all at once for all four corners.

I already have the front shocks and they are very well worth it. If anything I would recommend that you swap those out first if you decide to buy them. Dubstep Shep has some for sale @ a good price.

Dubstep Shep · Oct 30, 2015

BlkRamRt said:
If one of my shocks was not busted I would have got them off you and I could have waited a bit longer and saved some $ but I need them installed by sat morning because my dad is taking my truck on a trip over the weekend.

All good man!

Quicksilver337 · Oct 31, 2015

BlkRamRt said:
Looks like you will be fine with those in the rear, unless you want more adjustability I would recommend the QA1's. Only down fall is that they are pricey. I paid 344$ shipped to my house for both.

If you don't mind me asking.... Where did you buy your QA1 shocks? TIA

BlkRamRt · Nov 2, 2015

Quicksilver337 said:
If you don't mind me asking.... Where did you buy your QA1 shocks? TIA

Summit racing.

Belltech 4 inch rear drop shocks?

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Forum statistics

Share this page