bump stops

jojo750 · Nov 5, 2011

what are you doing with the stock bump stops after you lower your truck?
do you trim them, or remove them?
does the belltech kit come with new ones?

thanks

bigbadram1500 · Nov 5, 2011

Bumpin' this for our lowered members to chime in.

ARMYRETIRED · Nov 5, 2011

I trimmed the front and the rear came with replacements.

quietpeen · Nov 6, 2011

i wonder why the kit wouldn't come with smaller ones for the front too

mikehutch · Nov 6, 2011

My kit came with rear stops and I bought some enengy suspension universal ones for the front. See photos in my thread here:

http://www.ramforum.com/f46/2008-ram-quad-mcgauphys-2-4-5-kit-install-9148/

I might buy the next thickness up as a good bump my tires rub. But I took 1/4 coil out and it's a bit lower than the 2".

OutlawTrucker · Dec 2, 2011

I removed mine but I have a 2/5 drop and I occasionally bottom out in the back on rough RR trax.

JB1 · Dec 2, 2011

rear bumpstops are removed with a pull and a twist. Your suppose to cut the bumpstop cups off and mount your new ones to the axle plate pad

Krypt0n0tic · Dec 12, 2011

The belltech kit comes with front and rear bumpstops, simply swap out rear factory stops with new ones using a flathead screwdriver, the front u have to cut off the factory bumpstop mounting plate using a grinder and a cutoff wheel, make sure u got a face shield throws alot of sparks.

bump stops

jojo750

Senior Member

bigbadram1500

Senior Member

ARMYRETIRED

Senior Member

quietpeen

Senior Member

mikehutch

Member

OutlawTrucker

Senior Member

JB1

Senior Member

Krypt0n0tic

Junior Member

Similar threads

Latest posts

Members online

Forum statistics

Share this page