Level back with front on 14 RCSB

BigTex · Feb 27, 2017

I ordered the McGaughys 2" drop kit and once I received it I was made aware that this kit would not lower the rear to a full 2" drop on the Regular Cabs. I can't "lower" due to being in construction and constantly having to pop curbs and minor truck things so I planned on leveling the rear with the front. Is my only option the Ground Force kit or cut the rear springs?

grozier · Mar 3, 2017

I'll trade you mine. I bought some from a guy who had a regular cab short bed. Mines a cc6.5' bed and it drops mine to far. Not sure the brand just know they're gray powder coated. I have a level right side and a 1" sag on driver side. They said it's from the fuel tank but it's the same empty or full.

Sent from my SM-G935T using Tapatalk

BigTex · Mar 4, 2017

grozier said:
I'll trade you mine. I bought some from a guy who had a regular cab short bed. Mines a cc6.5' bed and it drops mine to far. Not sure the brand just know they're gray powder coated. I have a level right side and a 1" sag on driver side. They said it's from the fuel tank but it's the same empty or full.

Sent from my SM-G935T using Tapatalk

I returned them cause I was not getting an answer from anyone.

grozier · Mar 4, 2017

Hope you figure something out. I'm trying to find a solution for mine

Sent from my SM-G935T using Tapatalk

BigTex · Mar 4, 2017

grozier said:
Hope you figure something out. I'm trying to find a solution for mine

Sent from my SM-G935T using Tapatalk

You just need the mcgaughys springs. They cost me $201 shipped to my door.

jag1886 · Mar 23, 2017

I put a set of these McGaughy 2" springs in my 2014 RCSB and they where too low, rear was lower than the front, looked stupid. Took them out and sold them and cut 1 coil off my stock springs put them back in and it's level.

Avgas · Mar 23, 2017

I've been running the McGaughy springs for a year now and love it.

Speedy McD · Mar 23, 2017

My 2013 with Ground Force 2" rear drop. Perfect fit and maintained the ride.
I am in the process of duplicating on my '16.

BigTex · Mar 23, 2017

Aggravates me cause I bought the mcgaughys 2" springs and was told they would not work with the RC so I returned them..

N1ck · Mar 23, 2017

BigTex said:
Aggravates me cause I bought the mcgaughys 2" springs and was told they would not work with the RC so I returned them..

Seems to be mixed reviews on rcsb. Some guys say they get 1" others say 1.5"

abouttobeglue · Mar 24, 2017

I've got the mcgaughy 2 inchbrear springs, 44055 on my truck, driver side is perfect, but passenger side is about 3/4 inch higher. I assumed it was due to more weight o.n the drivers side due to the gas tank, but looking at the red ram above being dead nuts even on both sides, I'd say go with the kit he has.

tones2SS · Mar 24, 2017

I think I am going to order the Ground Force 2" rear drop kit when I am ready to level the truck off, which should be soon. Hopefully in the next month.

tones2SS · Mar 25, 2017

Just got the email back from Groundforce yesterday. Very fast reply. They also send directions as I asked about the install. Great customer service.
I may be ordering in the very near future. After that, I need a either a new muffler or full cat back system. Stock is way too quiet. Like driving a Lexus. LOL :roflsquared:

I was just thinking of swapping out the stock muffler for the Spintech 9000. Sounds like it has the most balls, in my opinion. The full cat back systems from Borla and Corsa are pretty good as well.

Here is the lowering kit for the 2016 Ram Sport 4X4, regular cab:
https://www.groundforce.com/part-details.php?part=91213

BigTex · Mar 27, 2017

tones2SS said:
Just got the email back from Groundforce yesterday. Very fast reply. They also send directions as I asked about the install. Great customer service.
I may be ordering in the very near future. After that, I need a either a new muffler or full cat back system. Stock is way too quiet. Like driving a Lexus. LOL I was just thinking of swapping out the stock muffler for the Spintech 9000. Sounds like it has the most balls, in my opinion. The full cat back systems from Borla and Corsa are pretty good as well.

Here is the lowering kit for the 2016 Ram Sport 4X4, regular cab:
https://www.groundforce.com/part-details.php?part=91213

I went with the Mufflex M80 (Muffler Delete) sounds awesome. I have no drone when driving and i have made multiple trips from dallas to houston.

abouttobeglue · Mar 28, 2017

I've got a black widow widowmaker, finally heard it yesterday to quote him it sounds like a racecar and scared the people at Dollar general. My 7 year old nephew says it sounds good, but is disgustingly loud.

ChiChi · Feb 20, 2018

Speedy McD said:
My 2013 with Ground Force 2" rear drop. Perfect fit and maintained the ride.
I am in the process of duplicating on my '16.

Did you run their shocks or retain stock shocks

Sent from my iPhone using Tapatalk

CarKnockerJim · Feb 21, 2018

looks like I am going with the ground force! I was gonna cut a coil to a coil and a half off to get level but that looks perfect to me! (the red truck)

Booms · Feb 21, 2018

Crown Suspension 1" front, 2" rear lowering kit, with ground force lowering springs in the rear.

ChiChi · Feb 26, 2018

Booms said:
Crown Suspension 1" front, 2" rear lowering kit, with ground force lowering springs in the rear.

View attachment 121026

Did you have any issues with alignment after the front install?

Sent from my iPhone using Tapatalk

Booms · Feb 26, 2018

ChiChi said:
Did you have any issues with alignment after the front install?

No, actually alignment was pretty straightforward. It's only a 1" spring, so nothing is too far out of whack.

Level back with front on 14 RCSB

Junior Member

Senior Member

Junior Member

Senior Member

Junior Member

Senior Member

Senior Member

Member

Junior Member

Senior Member

Senior Member

Attachments

Senior Member

Senior Member

Junior Member

Senior Member

Junior Member

Member

The OG

Junior Member

The OG

Similar threads

Forum statistics

Share this page