Adjusting bilsteins

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

blu3s94

Senior Member
Joined
May 29, 2015
Posts
113
Reaction score
21
Ram Year
2015
Engine
Hemi 5.7
Lifted the truck to 2.1 over the summer with 5100's and got an alignment. Truck is at 38 1/8'' front and 39'' back. I work construction and the bed is full of tools and its at 39''. I stayed away from 2.8 because of the problems I had heard. So if I got a different UCA this should fix any problem with going to 2.8? Also I am assuming to move the slot on the bilsteins I would have to completely dissasemble and start all over with another alignment? :(
 

chipmaker

Senior Member
Joined
Dec 21, 2011
Posts
307
Reaction score
114
Location
AZ
Ram Year
2012
Engine
5.7
Yes u have to take them apart to adjust. Different UCA may fix potential BJ popping issue, some dont do 2.8 due to vibration and some have reported slight stiffness at 2.8. Some love it. Good luck...
 
Top