Alright guys.. BILSTEINS post your pics!!!

akra11 · Apr 29, 2016

OK, had an alignment done after putting the bils in, only to get the truck back with a crocked steering wheel. Sitting a the shop now again to get it fixed. Aaaaargh

Sent from my SM-G530W using Tapatalk

Jerry1984 · Apr 29, 2016

akra11 said:
OK, had an alignment done after putting the bils in, only to get the truck back with a crocked steering wheel. Sitting a the shop now again to get it fixed. Aaaaargh

Sent from my SM-G530W using Tapatalk

Had that happen to mine as well.

akra11 · Apr 29, 2016

All fixed now, runs straight as an arrow

Sent from my SM-G530W using Tapatalk

R.L.K. · Apr 29, 2016

miguelherrera4 said:
Ya I noticed that when I took the pic.? Lol gotta get that replaced ASAP. Thanks!

Sent from my Nexus 6 using Tapatalk

Mig, if you haven't installed the CV yet , start a thread with lots of pics and narrative on 4TH Gen CV replacement and post a link here for your thread , just might help someone out !

Good luck Sir , with your CV and rear spacer

phrater · May 4, 2016

Before & after, Bilsteins set at 2.1, also installed Mevotechs, super easy.

New Terra Grappler G2's (275/65/20) will be put on early next week.

R.L.K. · May 4, 2016

I love the white Rams , great job on the bils & Mevotecs!

Ronan · May 4, 2016

Bils set @2.1
Stock UCA over 40k on it so far with ZERO issues

35k with 20x9 DC gun metals 0 offset 5" BS
325/60/20 nitto terra grapplers
Slight rub at full lock in reverse only

Can't find a clear pic.... I'll find one later hopefully

Now she sits on 22" oem R/T's +18 offset I believe 4" BS (?) wrapped in 305/45/22 atturo trail blade X/T's with 1 3/4" BORA spacers. Zero issues at all, no rub still @2.1

Sent from my iPhone using Tapatalk

jknappen · May 8, 2016

@ 2.1
3/4 inch rear tgc spacers
Mevotechs
275/65/20 cooper discovery st maxx

Sent from my iPhone using Tapatalk

R.L.K. · May 8, 2016

Nicely done Sir !
I'm gonna be getting spacers now

R.L.K. · May 8, 2016

jknappen said:
View attachment 70935 View attachment 70936 View attachment 70937
@ 2.1
3/4 inch rear tgc spacers
Mevotechs
275/65/20 cooper discovery st maxx

Sent from my iPhone using Tapatalk

Were your spacers steel or plastic ?
Did you install them on the top or the bottom of the rear coil ?
Thank you Sir for a response .

jknappen · May 8, 2016

R.L.K. said:
Were your spacers steel or plastic ?
Did you install them on the top or the bottom of the rear coil ?
Thank you Sir for a response .

Spacers are poly. Put them on the bottom they wont go on the top steel ones will but these wont.
You sir are welcome

Cb1000h · May 10, 2016

Ok so I have been reading this forum now for about a week and I think after reading this thread I have finally narrowed it down to the Bills for the front with Mevo UCA and I want to bring the back up as well
would a progressive rear spring be better than a spacer set up for ride quality
I'm going to get a set of Bils for the back as well to replace the factory shocks

I saw a link to the Mevo and the front Bils but cant seam to find it again and does anyone have any suggestions for a longer progressive spring to add some ride height (1.75ish) with an appropriate shock for the rear
I'm thinking of run the fronts at 2.8 and going with a 34" on stock rims
Found the Bil part numbers F:24-187367 R: 24-187374 (if these are appropriate for the added rear lift)
Is there a particular vendor we are all using for these items as I wish to send my business to the forum supporters
Thank you
Wayne

Ronan · May 10, 2016

I believe tuftruck makes a set of springs that increase load capacity and will raise it up about 1 1/2 or so. I've read a few good reviews about them, may be a little stiffer though...
As far as vendors ,myself and I'm sure MANY others have gone to Moe's performance. Matt is a great guy to deal with , Tons of knowledge and very helpful. Great customer service

Sent from my iPhone using Tapatalk

R.L.K. · May 10, 2016

Cb1000h said:
Ok so I have been reading this forum now for about a week and I think after reading this thread I have finally narrowed it down to the Bills for the front with Mevo UCA and I want to bring the back up as well
would a progressive rear spring be better than a spacer set up for ride quality
I'm going to get a set of Bils for the back as well to replace the factory shocks

I saw a link to the Mevo and the front Bils but cant seam to find it again and does anyone have any suggestions for a longer progressive spring to add some ride height (1.75ish) with an appropriate shock for the rear
I'm thinking of run the fronts at 2.8 and going with a 34" on stock rims
Found the Bil part numbers F:24-187367 R: 24-187374 (if these are appropriate for the added rear lift)
Is there a particular vendor we are all using for these items as I wish to send my business to the forum supporters
Thank you
Wayne

I'll post an informative post about the bilsteins install that has a good deal of tips and such .

As for the mevotecs www.rockauto.com has the best price I've found . You don't have to get them , I did " cheep $ insurance "

Hope this helps !

https://r.tapatalk.com/shareLink?ur...&share_tid=79370&share_fid=17770&share_type=t

Alright guys.. BILSTEINS post your pics!!!

Cb1000h · May 10, 2016

Thanks
I'll post up progress pics
Thanks for all,the help
Wayne

rpittman47 · May 11, 2016

Stock

Bilsteins at 2.1 and Airlift 1000 with 295/70/17

Unlike most, truck was too nose high for my liking. Added a 0.75 rear coil spacer.

Why I like having rake. Ironically this was before the 0.75 spacer, however I did have 25-30 psi in the airbags.

Also have a 1.5 inch body lift installed, no pictures yet.

R.L.K. · May 11, 2016

Very nice indeed Sir !

Cb1000h · May 11, 2016

Looks nice
I like it :happy107:

Cb1000h · May 11, 2016

R.L.K. said:
I'll post an informative post about the bilsteins install that has a good deal of tips and such .

As for the mevotecs RockAuto has the best price I've found . You don't have to get them , I did " cheep $ insurance "

Hope this helps !

https://r.tapatalk.com/shareLink?ur...&share_tid=79370&share_fid=17770&share_type=t

Alright guys.. BILSTEINS post your pics!!![/QUOTE

Yes thank you
Not sure how the taps talk works if that is how to access the post on Bils
I did download the app
But thanks again

R.L.K. · May 11, 2016

Cb1000h said:
R.L.K. said:

I'll post an informative post about the bilsteins install that has a good deal of tips and such .

As for the mevotecs RockAuto has the best price I've found . You don't have to get them , I did " cheep $ insurance "

Hope this helps !

https://r.tapatalk.com/shareLink?ur...&share_tid=79370&share_fid=17770&share_type=t

Alright guys.. BILSTEINS post your pics!!![/QUOTE

Yes thank you
Not sure how the taps talk works if that is how to access the post on Bils
I did download the app
But thanks again

Click to expand...

That link I posted for you above is Post # 26 hear in this thread , if it won't open for you .

Alright guys.. BILSTEINS post your pics!!!

Member

Senior Member

Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Member

Member

Senior Member

Member

Member

Senior Member

Similar threads

Forum statistics

Share this page