Lifted Laramies

bryan28 · Mar 31, 2017

Could you get a straight head on pic with the tires straight? I want to be sure the tires are at least as wide as the factory fender flares. Disregard. That first pic indicates they will stick out far enough.

Jershipe · Mar 31, 2017

They stick out about a half inch past factory flares. I got a set and painted them. Fit them on and decided I didn't want them

Sent from my iPhone using Tapatalk

quietpeen · Mar 31, 2017

This is a 20x10 wheel with -12mm offset and a 295 wide Toyo m/t mud tire and oem 2500 flares

Jershipe · Mar 31, 2017

The lift kit knuckles push the front tires out a little more . At least on the rcx kit.

Sent from my iPhone using Tapatalk

bryan28 · Mar 31, 2017

That'd be about the perfect width quietpeen.

Jershipe · Mar 31, 2017

Sent from my iPhone using Tapatalk

motofan · Apr 1, 2017

Not the best photo. I have 20x12 fuel maverick on 35 Toyo Mt. The wheels stick out just a bit past the flare not too bad though.

Sent from my SM-G935T using Tapatalk

929rob · Apr 1, 2017

Here's mine with 20 x 9, 0 offset wheels and 295/65/20 toyo's. The edge of the tire is flush with the edge of the factory flares.

Jameson · Apr 1, 2017

20x12 -44 with 37" Cooper STT Pros. The stick out a good bit though.

Jershipe · Apr 1, 2017

Jameson said:
20x12 -44 with 37" Cooper STT Pros. The stick out a good bit though.

Nice truck!!

Sent from my iPhone using Tapatalk

Fanta1500 · Apr 1, 2017

quietpeen said:
This is a 20x10 wheel with -12mm offset and a 295 wide Toyo m/t mud tire and oem 2500 flares

Think your flares will do much for protection on my setup?

Sent from my iPhone using Tapatalk

bryan28 · Apr 1, 2017

What do y'all think of Worx Wheels? I'm specifically considering the 803 Beast chrome for my silver laramie. Please give me your honest opinion. I want a clean, basic, spoked type wheel but they have been hard for me to find. The Worx I mentioned are in size 20x9 with a 5x139.7 bolt pattern and a -12 offset. How would that size work? Think there would be any rubbing issues after a 4" lift? Please share your honest opinions about how it would look and fit. If you go to the Worx site and under the menu button click "configurator" you can get an idea of what my truck would look like. Be sure if you go there to configure it as a 2016 lifted 4wd 3 inch lift and color it silver.

Jershipe · Apr 2, 2017

They should look great. Shouldn't run at all. I run same size. Plenty of clearance

Sent from my iPhone using Tapatalk

Jershipe · Apr 2, 2017

Shouldn't rub at all. Not run lol

Sent from my iPhone using Tapatalk

Raminwil · Apr 3, 2017

jljbtm said:
Looks higher in the front

Sent from my SM-N910V using Tapatalk

To the measuring tape it is about .25 in high in the front, i was parked on an incline so it looks a lot worse.

quietpeen · Apr 3, 2017

Fanta1500 said:
Think your flares will do much for protection on my setup?

Sent from my iPhone using Tapatalk

this is the coverage they gave on my old wheels 20x10 -24mm offset with 33x12.5 tires

Fanta1500 · Apr 3, 2017

quietpeen said:
this is the coverage they gave on my old wheels 20x10 -24mm offset with 33x12.5 tires

Okay awesome thanks, I'll probably end up going with those if any so the truck still has that nice and clean look

Sent from my iPhone using Tapatalk

Fanta1500 · Apr 3, 2017

Hey I just want to blast this question on the forum, I was wondering how many of you guys and girls are running bilsteins at 2.8 with zone upper control arms? Zone is telling me that my truck is not going to be aligned because my truck is sitting too high? Which Is total bs. Anyone have any idea on what I should do?

Sent from my iPhone using Tapatalk

bryan28 · Apr 8, 2017

929rob the 295/65r20 is about 11.6" wide. Could you take a pic from straight ahead so i could see how the tires line up with the flares? If yours sit flush with the outer edge of the flares then a 35x12.5 on a 20x9 with 0 offset should be what i'm looking for. I'd like to sit flush with outside of flares or maybe up to an inch beyond them. Nothing more aggressive than that. Your truck is clean looking. Looks good.

bryan28 · Apr 10, 2017

The tire shop is checking to see if he can get a set of 20x10 -18 wheels i like. If he can i'll be putting 35x12.5 Nitto Terra Grappler G2s on them soon.

Lifted Laramies

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Junior Member

Junior Member

Attachments

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Forum statistics

Share this page