24 inch wheel offset question

brobinson1283 · Mar 1, 2017

Hey guys. I am finally looking to put rims on my truck and thendoing the 2-4 drop on it. I have been looking all over the internet and ebay for wheels. I finally think i found some I want. Here are the specs:
Rim Width: 9.5
Size: 24x9.5
Offset: 15
Bolt Pattern: 5x115, 5x139.7

Am I going to have any issues with fitment on these. Everything seems to be right. Just not sure on the offset. I dont want these sticking out past the fender at all. In case I decide to bag it at some point. I am planning to put 305/40/22 tires on them. Any help thanks.

Here is a link to them: 24x9.5 Machined Black Cratus CR008 Wheels 5x115 5x5.5 +15 Fits CHRYSLER 300C RWD | eBay

Eestee70 · Mar 1, 2017

It shouldn't be a problem with rim width, but you may have a problem with offset. I think of oem offset is between 0 and -15 depending on the wheel. If you can....find a custom wheel shop in your area and see if they will test fit a wheel with that offset that way you will know for sure. Good luck

bgray · Mar 1, 2017

no problem. You might see SLIGHT rubbing on full lock turning, but thats nothing to be concerned about

I run 24x10 +25. I run 305/35r22

Eestee70 · Mar 1, 2017

Nice looking truck, bgray

Mpgrimm2 · Mar 1, 2017

bgray said:
no problem. You might see SLIGHT rubbing on full lock turning, but thats nothing to be concerned about

I run 24x10 +25. I run 305/35r22

How do you run a 22" tire on a 24" rim?
Typo?

M² Mods - From my non Flammable S7!

DRkNESS · Mar 1, 2017

Oh I thought he meant that he runs a 22" wheel, my bad.

Sent from my iPad using Tapatalk

brobinson1283 · Mar 1, 2017

Yes typo. 24 inch tire. on 24 " rim. So the +15 offset should be okay. Every rim I have been looking at seems to have that offset on it. I have only found one other with a +18

ohh7_5sevum · Mar 1, 2017

doing a 3/5 on mine

Sent from my SM-N910V using Tapatalk

FluidConcepts · Mar 2, 2017

I have 24s with that offset and they will not tuck. They are flush with the body and don't stick out. My bagged ram has.custom wheels with an offset to tuck

bgray · Mar 2, 2017

it'll work. Unless you have drop spindles then your in a different boat.

ohh7_5sevum · Mar 19, 2017

FluidConcepts said:
I have 24s with that offset and they will not tuck. They are flush with the body and don't stick out. My bagged ram has.custom wheels with an offset to tuck

War size tire are you runnin

Sent from my SM-N910V using Tapatalk

brobinson1283 · Mar 20, 2017

I am looking at getting these rims. They are a 22" wheel. Then I was going to get the 305/40-22 tire for them. Hoping there were no issues

22 inch 22x9.5 Red Sport RSW77B Black Machined wheel rim 5x5.5 5x139.7 +25 | eBay

BlownGP · Mar 21, 2017

brobinson1283 said:
I am looking at getting these rims. They are a 22" wheel. Then I was going to get the 305/40-22 tire for them. Hoping there were no issues

22 inch 22x9.5 Red Sport RSW77B Black Machined wheel rim 5x5.5 5x139.7 +25 | eBay

Those will fit fine and the tire will be perfect for a drop.

Kab · Mar 21, 2017

I actually just purchased them 24" cratus wheels with the +15 offset, I'm using 295/40 tires and I know there'll be no running. The stocks on my 16' are 20x8 with a +19 offset.

Sent from my iPhone using Tapatalk

BlownGP · Mar 21, 2017

Kab said:
I actually just purchased them 24" cratus wheels with the +15 offset, I'm using 295/40 tires and I know there'll be no running. The stocks on my 16' are 20x8 with a +19 offset.

Sent from my iPhone using Tapatalk

Yeah, you will be fine with that offset.

Lownismo · Dec 3, 2017

Curious! How did your 24’s fit and what tire size did you with?

24 inch wheel offset question

brobinson1283

Member

Eestee70

Senior Member

bgray

Senior Member

Eestee70

Senior Member

Mpgrimm2

Senior Member

DRkNESS

Senior Member

brobinson1283

Member

ohh7_5sevum

Junior Member

FluidConcepts

Junior Member

bgray

Senior Member

ohh7_5sevum

Junior Member

brobinson1283

Member

BlownGP

Senior Member

Kab

Member

BlownGP

Senior Member

Lownismo

Junior Member

Similar threads

Latest posts

Members online

Forum statistics

Share this page