33x12.5x20 -44 offset

Dryates · May 2, 2017

New to the forum and new owner of ram 1500 4x4.

I'm wanting to buy rims and tires soon and I am curious if anyone is running 33x12.5 tires with 20x12 rims -44 offset on stock height. I think my truck may have only a 1 inch rake from factory as opposed to the 3 inch some have. Customwheeloffsets website shows a few rams running this with no rubbing but I'm suspicious. Any thoughts?

VegasDragger45 · May 2, 2017

I ran a 35" tire on a 20x12 -44 with a 4.5" front lift and rubbed like crazy. I couldn't turn at full lock and had to cut a ton out of my front bumper. a 33" is smaller but you will still rub if stock upfront

quietpeen · May 2, 2017

Chances are it will rub

Rzrman328 · May 2, 2017

Rubbage.

Dryates · May 2, 2017

What about with bilstein leveling shocks, I would trust this more to not rub? A friend of mine has 35s on a 2 inch level spacers and rubs just a little with 20×10 -24 35x12 I believe

Tsnyder527 · May 3, 2017

33's will not rub with the bilsteins, that's the set up I have, bilsteins set at 2.8 with 305/55/20 on 20x12 -44

Fanta1500 · May 3, 2017

I run 20x10 -18 with 305/55/20 and rub reverse full lock, very minimal. Also running bils at 2.8

Dryates · May 11, 2017

20x12 with 33s, leveled

Can anyone running 20x12 33s with around -44 offset chime in on whether I can run these with just a level, without cutting or trimming my fenders. Yes I have searched and I'm getting a lot of yes from customwheeloffset.com, and that I will have to cut from local shops.

Tsnyder527 · May 12, 2017

They shouldn't rub with a level, like I said I have 305/55/20 (33.2") on 20x12 -44 birth bilsteins set at 2.8 up front and didn't have any trimming and no rubbing...still have plenty of room

Dryates · May 12, 2017

Post cool, that's the set up in wanting to go with for now

Eased · May 12, 2017

-44 is a super aggressive offset, are you sure you want that? It's a truck...

I have 33" tires on fuel throttle 20x10 -12 offset rims with a 2" leveling kit. No spacers. No rub. Pic below:

Dryates · May 12, 2017

I'm not 100% on it, but I really like the look of them. Btw, yours looks very nice

BiGMERF · Jun 20, 2017

im in almost the same struggle

im looking to run 20x9 0 offset with 1.75 boras (essentially -44)

with either 35 or 33 x12.5

im leveled at 2.1with bilsteins

i read to much neg about 35's and started looking at 33's as an option after i saw a leveled Tundra in person running them

quietpeen · Jun 20, 2017

BiGMERF said:
im in almost the same struggle

im looking to run 20x9 0 offset with 1.75 boras (essentially -44)

with either 35 or 33 x12.5

im leveled at 2.1with bilsteins

i read to much neg about 35's and started looking at 33's as an option after i saw a leveled Tundra in person running them

You would defiantly have rubbing with 35's. My truck is set at 2.1 with 34" tires and a lot less offset and I have some rubbing

BiGMERF · Jun 20, 2017

My 275/65 I have now are basically a 34 inch, no ? I have no running. What size are your wheels, offset and running spacers ?

I don't rub. Don't have the 1.75 spacers on yet though

quietpeen · Jun 20, 2017

BiGMERF said:
My 275/65 I have now are basically a 34 inch, no ? I have no running. What size are your wheels, offset and running spacers ?

I don't rub. Don't have the 1.75 spacers on yet though

The problem is pushing the wheels out so far....you increase the turning radius. That is why you don't rub now because you are more tucked in

My wheels are 20x10 with -12mm offset and 295/60/20 tires.

BiGMERF · Jun 20, 2017

Damm peen. Now you got me worried. I may have pushed it with the 1.75 spacers. Noooooo
I see all these trucks with wheels coming out what seems like half a foot. How do they get away with it.

Dryates · Jun 20, 2017

BiGMERF said:
Damm peen. Now you got me worried. I may have pushed it with the 1.75 spacers. Noooooo
I see all these trucks with wheels coming out what seems like half a foot. How do they get away with it.

33s and not 35s, or they trimming and cutting, so there won't be rubbing

BiGMERF · Jun 20, 2017

Dryates said:
33s and not 35s, or they trimming and cutting, so there won't be rubbing

What ? ROLMAO

Dangulo · Jun 20, 2017

I run 20x10 moto metal -24mm offset with 35x12.5x20 nittos

I had to trim the lower valence to avoid rubbing on the front bumper.

33x12.5x20 -44 offset

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Attachments

Similar threads

Forum statistics

Share this page