Driver "Fog light" not turning on

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

PCT

2019 2500 6.4
Joined
May 9, 2014
Posts
2,107
Reaction score
475
Location
Northern California
Ram Year
2019
Engine
6.4
Its been rainy and muddy here in cali for past few weeks and i love it, but i noticed my LED light pod on the driver side died, so i figured it just took a **** and died. So i replaced it with a different lightpod, and the driver one still doesnt turn on, passenger does. Where should i start
 

AustinB

Banned
Joined
Sep 8, 2015
Posts
3,942
Reaction score
2,052
Location
San Diego, Left Coast
Ram Year
2015
Engine
hemi 5.7
Brah, do you even troubleshoot?

You should give more details... how are they wired? Switch? Stock harness? What have you done so far? Etc, etc.
 

sbarron

Senior Member
Joined
Feb 28, 2015
Posts
3,362
Reaction score
2,277
Location
Wasilla, Alaska
Ram Year
2013
Engine
5.7 HEMI
If only one side has stopped working and you've eliminated the possibility that it's the pod itself, you can be certain that the failure is somewhere past the point the two pods have in common, (i.e. relay, switch, etc). start at the most likely place. You said it's been wet, check the plug and work back from there to the point where the non-functional pod splits from the working side.
 
OP
OP
PCT

PCT

2019 2500 6.4
Joined
May 9, 2014
Posts
2,107
Reaction score
475
Location
Northern California
Ram Year
2019
Engine
6.4
If only one side has stopped working and you've eliminated the possibility that it's the pod itself, you can be certain that the failure is somewhere past the point the two pods have in common, (i.e. relay, switch, etc). start at the most likely place. You said it's been wet, check the plug and work back from there to the point where the non-functional pod splits from the working side.

So i spent a few hours fiddling with it, got it working, the pod was dead, tested it with a battery. But a battery to both 1 lit 1 didnt, i just went to autozone bought a new 9006, hooked it up, cleaned all of the connectors and badabang! I should have put, i wired my fogs into the factory wiring harness, so it only goes up to the main connector, otherwise id figure it was a bad fuse
 
Top