P0306 and related

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

stoviAZ

Member
Joined
Jun 28, 2017
Posts
48
Reaction score
14
Ram Year
2011
Engine
5.7
So.. Getting cyl misfire #6
What's weird is that the truck almost dies when I come to a complete stop in drive.

I just had the cam replaced along with all new lifters removing MDS and had the MDS tuned out.

I'm approaching my 500-mile mark after the cam Swap and lifter change so I'm about to do an oil change on it as well.

Truck has 108,000 miles on it so the solenoids and Sparks and wires are all original to the vehicle.

I saw somewhere that that code could mean a number of things.

I've had Vehicles misfire before but never almost died when I come to a complete stop any ideas

Sent from my LG-H910 using Tapatalk
 

RamCares

Senior Member
Joined
Jan 21, 2016
Posts
3,782
Reaction score
1,513
Location
Michigan
Ram Year
n/a
Engine
n/a
So.. Getting cyl misfire #6
What's weird is that the truck almost dies when I come to a complete stop in drive.

I just had the cam replaced along with all new lifters removing MDS and had the MDS tuned out.

I'm approaching my 500-mile mark after the cam Swap and lifter change so I'm about to do an oil change on it as well.

Truck has 108,000 miles on it so the solenoids and Sparks and wires are all original to the vehicle.

I saw somewhere that that code could mean a number of things.

I've had Vehicles misfire before but never almost died when I come to a complete stop any ideas

Sent from my LG-H910 using Tapatalk

Hi stoviAZ,

Sorry to hear about this! If you end up deciding to visit your local dealership for further diagnosis I'd be happy to offer assistance if needed. Just PM our page with your VIN and let me know.

Andrea
Ram Social Care Specialist
 

huntergreen

Senior Member
Military
Joined
Jan 5, 2011
Posts
12,186
Reaction score
25,926
Ram Year
2016
Engine
hemi 5.7
its possible you you have dropped a valve and taken out a cam lobe.
 
Top