Pedal Commander Eng Error

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

RoadKing

Senior Member
Joined
Oct 24, 2013
Posts
395
Reaction score
103
Location
Ga
Ram Year
2022 Bighorn
Engine
HEMI 5.7
I have had my pedal commander a few weeks. Really like it. But today i got a service electronic throttle message.

I stopped the truck and turned it off and back on and the message went away and then the truck ran fine but the engine light stays on now.

I am out of state and plan to drive 7 hrs back in a couple days.
Only way i can figure to remove the engine light is disconnect the neg battery terminal for a few mins?

Assuming its just a old error code now, not sure.
2016 Sport.

Thanks.
 

JB1

Senior Member
TOTM Winner
Joined
Nov 3, 2011
Posts
8,366
Reaction score
7,527
Location
Houston, Texas
Ram Year
2017
Engine
Hemi 5.7
You can go to any auto parts store and they'll clear the code with a handheld scanner for free, then see if it returns.
 
OP
OP
RoadKing

RoadKing

Senior Member
Joined
Oct 24, 2013
Posts
395
Reaction score
103
Location
Ga
Ram Year
2022 Bighorn
Engine
HEMI 5.7
I might start carrying my scanner in my truck after this.
 

unxpctd

Senior Member
Joined
Aug 3, 2017
Posts
775
Reaction score
511
Location
Minnesota
Ram Year
2021 PW 75A
Engine
6.4 Hemi
May be worth making sure everything is seated correctly (the clips I mean).

And don't run it in ECO mode...I also heard that (as was mentioned).
 

jasonw

Senior Member
Supporting Member
Joined
Feb 25, 2011
Posts
1,047
Reaction score
559
Location
South Dakota
Ram Year
2020
Engine
5.7L Hemi V8
You can go to any auto parts store and they'll clear the code with a handheld scanner for free, then see if it returns.

Just a note... many won't do that anymore. They may still read the codes for free (some are even getting rid of that!), but many won't clear them anymore for you. Liability issues, they say.
 

R.L.K.

Senior Member
Supporting Member
Joined
Dec 1, 2013
Posts
12,803
Reaction score
12,500
Location
Bristol , Tn.
Ram Year
2014 4X4 QC Express 6 speed auto 355 differentials
Engine
5.7 Hemi
When the engine light is on , it's not uncommon for it to stay illuminated for several power ups and shut downs aka driving 3-5 times before it resets.

Disconnecting the battery for a bit to overnight may clear a fault ; however, just simply disconnecting the battery will cause an engine light for 3-5 power up & shutdowns all by itself .

Hope this Helps !

Sent from my SM-G900V using Tapatalk
 

808ram1500

Senior Member
Joined
Mar 5, 2017
Posts
434
Reaction score
89
Location
Big Island, Hawaii
Ram Year
2011
Engine
4.7L
I had this happen to me last month. Deleted the code and it ran fine. Now my try is stuck in limp mode, 4th gear. P0750. I wonder if PC has anything to do with this? Probably not, as I have 82xxx miles and have read that the shift solenoid is a common problem. I'll have to contact PC to see if this could be related to PC.
 

Burla

Senior Member
Military
Joined
Apr 28, 2012
Posts
23,115
Reaction score
44,461
Ram Year
2010 Hemi Reg Cab 4x4
Engine
Hemi
hopes this resolves RK.
 

Forum statistics

Threads
194,925
Posts
2,864,170
Members
155,296
Latest member
VLG6963
Top