carrmann
Junior Member
Bought the truck about 4 ish weeks ago, first tank I filled it up no sweat. Since that tankful I have NOT been able to fill it up. The pump 'pops' after about .5 gals on average. It takes around 10 minutes or so to do 8 gallons.
I borescoped the fill tube (no blockage, and the spring valve at the tank doesnt depress with very much effort), and I pulled out the vent tube/fill tube and blew them out with pressurized air. Also blew out the tube itself that connects to the pump and neck (that was a pain to remove!).
Is there anything else I can do to cure this issue besides changing the gas tank/fuel pump? Is there a filter or vent somewhere I missed?
I borescoped the fill tube (no blockage, and the spring valve at the tank doesnt depress with very much effort), and I pulled out the vent tube/fill tube and blew them out with pressurized air. Also blew out the tube itself that connects to the pump and neck (that was a pain to remove!).
Is there anything else I can do to cure this issue besides changing the gas tank/fuel pump? Is there a filter or vent somewhere I missed?