right axle problem

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

760volvo

Junior Member
Joined
Apr 27, 2017
Posts
2
Reaction score
4
Ram Year
2003
Engine
5.7
Had the 1500 in shop putting in new upper and lower control arms and new axles left side went well then the right side going smooth install control arms then the axle spline going in to diff were strip what could cause this??? Any help would be great.
Thanks Richard
 

Jerseystyle

Senior Member
Joined
Feb 11, 2017
Posts
651
Reaction score
350
Ram Year
2007
Engine
4.7
Had the 1500 in shop putting in new upper and lower control arms and new axles left side went well then the right side going smooth install control arms then the axle spline going in to diff were strip what could cause this??? Any help would be great.
Thanks Richard
Just so I'm tracking, the half shaft splines on the DIFF side were stripped?

For that to happen, something had to seize up. I wouldn't suspect it was caused from the Diff unless you were in 4wd and have a locker. Brakes/Unit Bearing would be the first thing I check. I'd also pull the diff cover and inspect in there.

Sent from my SAMSUNG-SM-G890A using Tapatalk
 
Top