Ian_Olivas
Senior Member
- Joined
- Oct 19, 2016
- Posts
- 325
- Reaction score
- 67
- Location
- San Antonio,Tx
- Ram Year
- 2002
- Engine
- 4.7L Magnum
I was wondering where I can find these torque specs unless someone knows these already then please let me know.
-Upper control arm
-lower ball joints
-sway bar end link
-inner tie rod
-outer tie rod end
And I have to remove the wheel bearing right? So I guess that torque spec
This what I found so far correct me if I'm wrong please or let me know what is correct
-Upper control arm to frame 97ftlbs/ball joint 60ftlbs
-lower ball joints 60ftlbs
-outer tie rod end 45ftlbs plus 90° turn
-sway bar end link top nut 27ftlbs bottom nut 75ftlbs
the only one I didn't find was the inner tie rod. Please let me know if this is right or wrong
-Upper control arm
-lower ball joints
-sway bar end link
-inner tie rod
-outer tie rod end
And I have to remove the wheel bearing right? So I guess that torque spec
This what I found so far correct me if I'm wrong please or let me know what is correct
-Upper control arm to frame 97ftlbs/ball joint 60ftlbs
-lower ball joints 60ftlbs
-outer tie rod end 45ftlbs plus 90° turn
-sway bar end link top nut 27ftlbs bottom nut 75ftlbs
the only one I didn't find was the inner tie rod. Please let me know if this is right or wrong
