Lowered 3rd Gen Pics - Show Em Off!

RAtmosphere · Aug 23, 2013

Heres mine...right at 20K to bag it....way WAY more fabrication under this thing than it may appear...but to get a 1 ton dodge dually to lay out, you have to do a TON of work

Redtruck-VA · Aug 23, 2013

RAtmosphere said:
Heres mine...right at 20K to bag it....way WAY more fabrication under this thing than it may appear...but to get a 1 ton dodge dually to lay out, you have to do a TON of work

Looks great! Takes a lot of work to lay out.... well done.

gearhead · Aug 24, 2013

My Truck

Heres my dodge. 2" lowering shackle, Ebay Headlights, 17" XD KMC 125's. Painted Bumpers, added black strip on doors between the glass to update the look.

Not done yet but it's a start.

moparman · Aug 24, 2013

Heres mine. 3 inch drop djm arms in the front, McG's flip with stock shackles, frame notch, airlift slam air and compressor kit and some 305/50 20" nitto 420's stuffed under it

Redtruck-VA · Aug 24, 2013

Looks good...

TheSatinPumpkin · Aug 24, 2013

Very nice.

moparman said:
Heres mine. 3 inch drop djm arms in the front, McG's flip with stock shackles, frame notch, airlift slam air and compressor kit and some 305/50 20" nitto 420's stuffed under it

09SMOKINHEMI · Aug 24, 2013

I likey

sent from my Samsung Galaxy S3

moparman · Aug 25, 2013

Thanks guys, its the first vehicle that ive actually gone through top to bottom and slowly pieced it together to what it is now

Sent from my Galaxy S3 using Tapatalk 2

derekd7987 · Aug 29, 2013

Here's mine. 2008 Laramie with 2/4 drop with the rear in the 4.5 setting and front springs trimmed a little and running 305/35R24. Also just recently had a makeover removing or painting all of the chrome.

TheMaddog · Sep 3, 2013

I'm liking that!!!

gearhead · Sep 7, 2013

derekd7987 said:
Here's mine. 2008 Laramie with 2/4 drop with the rear in the 4.5 setting and front springs trimmed a little and running 305/35R24. Also just recently had a makeover removing or painting all of the chrome.

Nice 450R. I ride a 450R, best handling quads!

ST-8 · Sep 9, 2013

bouf0010 · Sep 9, 2013

Simple 2" rear drop with air bags, 305/55R20 cooper zeons on stock 20s
Before

After

Sent from my SGH-I317M using Tapatalk 4

HEMIBjörn · Sep 17, 2013

This is like the best thread haha

Demon-HeMi · Sep 26, 2013

I wont post a finished pic, but ill post a Build pic of my truck, (Finished will be after the Debut show in Oct.) but 5/12 drop when it was all said and done :banana-mario:

joshgiles99 · Sep 30, 2013

im new here lowered 2/4 thinkin about goin lower

joshgiles99 · Sep 30, 2013

Ive got spindles up front and flip kit in the back u guys running coils up front for 4"? And yall running blocks out back or leafs? For 6 or 7 inches"

HEMIBjörn · Sep 30, 2013

Man that's a great looking truck as is! Is that a new paint job? Really one of the best looking trucks I have seen around here

joshgiles99 · Oct 1, 2013

nah stock paint i just had the bumper repainted due to some bad nicks from interstate driving and the mirrors painted, i appreciate ive had it like it is awhile so im kinda wanting to change it maybe go lower, the front tires are really to wide for the height now they scrub the inner fenders if i hit a really big bump but its not to bad

Redtruck-VA · Oct 1, 2013

You can put suspension bump limiters to keep the tires off the inner fender liners. If it is rubbing the ender lip you can adjust the camber for clearance.

Lowered 3rd Gen Pics - Show Em Off!

Senior Member

Attachments

Senior Member

Member

Senior Member

Attachments

Senior Member

Senior Member

Senior Member

Senior Member

Junior Member

Attachments

Senior Member

Member

Senior Member

Attachments

Senior Member

Member

Senior Member

Attachments

Member

Member

Member

Member

Senior Member

Similar threads

Forum statistics

Share this page