05singlecabHEMI
Senior Member
So Friday got home from work about 11pm. Headlights were giving me trouble so i decided to dig into them. finally giving up i saw a bent connector, which is the same connector JJ sent me a couple weeks ago. So got it all fixed and decided to put the switch backs in aswell! THese things are too cool and very bright. only issue i have it they arnt the same color as the headlights, but its not too bad in my opinion.
Next up was lowing the rear to get ready for the front spacers out. switched out the shackles and put it on the ground. and it is level with the front with the spacers on. So the spacers are staying on. Put new lower and upper ball joints, and also new tie rods in today. So here are the pics!
Lowering shackles installed
my favorite pic of the switchbacks taken while up in the mountains.
headlights on
hazards on
close up no lights on
Just the switch backs on
Next up was lowing the rear to get ready for the front spacers out. switched out the shackles and put it on the ground. and it is level with the front with the spacers on. So the spacers are staying on. Put new lower and upper ball joints, and also new tie rods in today. So here are the pics!
Lowering shackles installed
my favorite pic of the switchbacks taken while up in the mountains.
headlights on
hazards on
close up no lights on
Just the switch backs on