Ramforums

**jusjay727** · 08-25-2010, 04:29 PM

Register to remove these ads. It's free!

i plan on going down when i can fab up my flip and get some drop springs, that said i hope to do this during the winter months in fla...so i need to know if there is room on the passenger side of the truck to be able to run my exhaust out in front of my tire and use challenger tips to finish the look....i just need to know if the leafs will be in my way for the exhaust runs.....i hate to do this and then it be in the way and redo the exhaust i have a issue about every 6 mths that the d/s tip hanger comes un-welded....and i hate it....

**The Assassin** · 08-25-2010, 04:32 PM

I have the Gibson Super Truck exhaust tips, they exit on the side. Now, since you are going to lower it, not sure if that would affect clearance or not.

**jusjay727** · 08-25-2010, 04:41 PM

very similar tips but the chally tips are 6x2.5" and have 2.5" piping to weld too...

**The Assassin** · 08-25-2010, 05:37 PM

Gotcha, idk I am sure that there are lowered Ram specific forums out there you can post on. Or, check with your local exhaust shop.

**jusjay727** · 08-25-2010, 05:43 PM

this is in the lowered section....

**rocket** · 08-25-2010, 05:46 PM

Ya know now would be a good time too consider going thru the body panel. That would look awesome, rectangle , circles, maybe bologne cuts on an angle. Hmmm. It's not that hard a mod, course your gonna need another panel (in case you fuck up.) But the first cut is the hardest.

**badblackram06** · 08-25-2010, 05:52 PM

how low are you going? I've lowered mine till the frame sits directly on the rear end (using flip kit plus the short lowering shackles) and my exhaust is ran in front of my rear tire and it was still at least an inch away from the leaf springs. here is a quick pic i just took of what it looks like on mine. sorry for the quality. It may not even be close to what you are talking about ha.

**The Assassin** · 08-25-2010, 05:57 PM

Originally Posted by jusjay727

this is in the lowered section....

I mean a specific forum lol

Originally Posted by rocket

Ya know now would be a good time too consider going thru the body panel. That would look awesome, rectangle , circles, maybe bologne cuts on an angle. Hmmm. It's not that hard a mod, course your gonna need another panel (in case you fuck up.) But the first cut is the hardest.

That is what I am going to do over the winter. TBE, on each side.

**jusjay727** · 08-25-2010, 06:37 PM

yes brandon thats very close to what im thinking....

**MOPAR78** · 08-25-2010, 06:46 PM

Register to remove these ads. It's free!

Wow! I didn't realize how close the shackle was. I had to look at mine and I'm guessing you could go 7" to 8" max before trouble would soon follow...

Fully Driven Auto Network
GM Truck Forum Ford Raptor Forum Chevy Tahoe Forum Chevy Cobalt Forum Chevy Camaro Forum Toyota FJ Cruiser Forum	Ford Truck Forum 88-98 GM Truck Forum 73-87 Gm Truck Forum Ford Expedition Forum Chevy Equinox Forum Chevy Cruze Forum	Jeep Liberty Forum Jeep Forum Dodge Ram SRT10 Forum Chrysler 200 Forum Scion xD Forum Scion xB Forum	Dodge Challenger Forum SRT Forum Nissan Titan Forum Buick Enclave Forum Cadillac Forum Cadillac XTS Forum

Ramforums

questions guys....