adding fog lights?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

0212353

Vendor
Preferred Vendor
Joined
Jun 29, 2010
Posts
26,467
Reaction score
2,023
Location
Florissant, MO
Ram Year
2019 1500 Laramie Sport Crew, 2019 1500 Big Horn Sport Crew & 2016 Charger SRT Hellcat
Engine
2x 5.7L & 6.2L
I think Dodge makes a kit, with all the parts. Do you have the connectors by the fog holes already?
 
OP
OP
BAMA BOY

BAMA BOY

Senior Member
Joined
Aug 14, 2010
Posts
378
Reaction score
12
Location
Gasden,Alabama
Ram Year
2002
Engine
4.7 Liters of fire breathing fury!
no idea ill have to look tomorrow i hope i do lol
 

05singlecabHEMI

Senior Member
Joined
Jan 26, 2011
Posts
2,692
Reaction score
98
Location
Lilburn,GA
Ram Year
2005
Engine
5.7 HEMI
I was wondering the same. I have one side that has the connectors but the passenger side doesnt.
 

0212353

Vendor
Preferred Vendor
Joined
Jun 29, 2010
Posts
26,467
Reaction score
2,023
Location
Florissant, MO
Ram Year
2019 1500 Laramie Sport Crew, 2019 1500 Big Horn Sport Crew & 2016 Charger SRT Hellcat
Engine
2x 5.7L & 6.2L
if you do, I think its as easy as getting a new switch, the fogs and a computer program from the dealer.
 
OP
OP
BAMA BOY

BAMA BOY

Senior Member
Joined
Aug 14, 2010
Posts
378
Reaction score
12
Location
Gasden,Alabama
Ram Year
2002
Engine
4.7 Liters of fire breathing fury!
that would be sweet if its that easy!
 

shadow11

Banned
Joined
Aug 9, 2010
Posts
2,597
Reaction score
10
Location
Houston TX
Ram Year
2005, 2009
Engine
5.7 Hemi
Its a simple job. You need the fog lights, foglight bezels, harness that connects the fog lights to the plug under the drivers side headlight and a new headlight switch with fog light control. Only the 06 and up Rams have to be programed at the dealer for the foglights to come on. 02-05 is simply plug and play.
 
OP
OP
BAMA BOY

BAMA BOY

Senior Member
Joined
Aug 14, 2010
Posts
378
Reaction score
12
Location
Gasden,Alabama
Ram Year
2002
Engine
4.7 Liters of fire breathing fury!
thanks fellas ill look in to this when i have more time
 

mitchman

Senior Member
Joined
Dec 29, 2010
Posts
753
Reaction score
2
Location
SC
Ram Year
2010
Engine
5.7 Hemi
I put the fogs on my 08. Install is a breeze as stated. There will only be one connector, on the driver's side. The harness to get to the other side comes with the fog lights. The kit is really nice.
 

Redtruck-VA

Senior Member
Joined
Jun 29, 2010
Posts
5,864
Reaction score
984
Location
Virginia
Ram Year
2003 & 1989 D250 RWD
Engine
Hemi-5.7, 5.9 12v & 24v diesel

There are a couple ways to wire the fogs up. I used a kit similar to the one listed here. It is a stand alone kit which has several advantages over the OEM Dodge kit. It doesn't need the main headlight switch to be replaced or PCM flashed, the fogs can be turned on /off with a rocker switch. OEM fogs only come on when low beams are in use. Stand alone fogs can be used anytime regardless what other lights are in use or not. I use mine as daylight running lights. and with my high beams. Keep in mind the PCM controls all the electrical stuff through a 5v multiplex signal, basically the various switches terminate a resistance of different values to tell the PCM what it should do, such as turn on left turn signal, high beam, windshield wiper and so on. Stand alone works outside the OEM system as in Old school stuff. At some point I intend to fool with high/low beam switch to see if I can tell the PCM to turn both on at the same time. Anyway, my 2 cents.. Good luck
 
Last edited:
Top