Painted Calipers

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Trupiano

Registered User
Joined
Jun 27, 2010
Posts
10,981
Reaction score
725
Location
Hometown : Puyallup,WA Stationed : Little Rock,
Ram Year
2010 Ram 2500 6.7L CTD Crew Cab
Engine
6.7L CTD
Hey dudes, I painted my calipers today. Still have to try an bleed the brakes tomorrow since I ran out of help, fluid, and light. Here's some shots, post more of them with the wheels on tomorrow.









 

0212353

Vendor
Preferred Vendor
Joined
Jun 29, 2010
Posts
26,467
Reaction score
2,023
Location
Florissant, MO
Ram Year
2019 1500 Laramie Sport Crew, 2019 1500 Big Horn Sport Crew & 2016 Charger SRT Hellcat
Engine
2x 5.7L & 6.2L
purdy!
 

rocket

Licensed Dynacologist
Joined
Jun 26, 2010
Posts
18,075
Reaction score
3,918
Location
connecticut
Ram Year
was 2006
Engine
was a HEMI 5.7
Really nice work, Just remember, farthest wheel first when you begin the bleeding process. Even thou i see only the front whees for pix I'm asssuming you did them all.
 

ramhunter9

Senior Member
Joined
Jun 25, 2010
Posts
24,464
Reaction score
975
Ram Year
2012
Engine
P-Star Jeep Wrangler
sweet
looks real good bro
 
OP
OP
Trupiano

Trupiano

Registered User
Joined
Jun 27, 2010
Posts
10,981
Reaction score
725
Location
Hometown : Puyallup,WA Stationed : Little Rock,
Ram Year
2010 Ram 2500 6.7L CTD Crew Cab
Engine
6.7L CTD
Thanks guys! Yeah learned that tip the hard way rocket. Wasted my last hour of daylight, now I have to wait till morning to try again. I started with the fronts and couldn't get rid of all the air. Thanks for the tip man. Ill bleed the rears first in the morning.
 

OklaHemi

Supporting Member
Joined
Jun 25, 2010
Posts
4,254
Reaction score
24
Ram Year
04
Engine
new age hemi
One of my favorite mods
 

nim81

Senior Member
Supporting Member
Joined
Jun 29, 2010
Posts
1,507
Reaction score
30
Location
Fredericktown, MO
Ram Year
2006
Engine
5.7L
looks great man! i think i might give this a shot...
 

dodg360

Member
Joined
Jun 29, 2010
Posts
38
Reaction score
16
Location
Post Falls, Idaho
Ram Year
2004 Dodge Ram SLT QC 4X4 SB
Engine
4.7 Magnum
Looks great! I love my red calipers and I get more comments on that $15 mod than almost anything else on my truck.
212-2k4-ram.jpg
 
OP
OP
Trupiano

Trupiano

Registered User
Joined
Jun 27, 2010
Posts
10,981
Reaction score
725
Location
Hometown : Puyallup,WA Stationed : Little Rock,
Ram Year
2010 Ram 2500 6.7L CTD Crew Cab
Engine
6.7L CTD
Ok guys, had a bunch of problems bleeding the brakes, and figured it out. When I put my calipers back on, I put them on the wrong wheels. There perfectly symetrical, except for the bleed screw. I had them on so the bleed screw was on the bottom of the caliper... there was no way for the air to escape. So I swaped them the two fronts with each other so the screws were on top, and Viola! After 2 mins of bleeding they are PERFECT! Thanks all!

Here's some shots.

Notice the bleed screws on the bottom : WRONG!



Here's the finished product... bad light but they are there.
 
Joined
Jun 28, 2010
Posts
3,085
Reaction score
3
Ram Year
2004
Engine
5.7
Something with a more open spoke pattern would really show off those calipers.
 

MOPAR78

Senior Member
Joined
Jun 29, 2010
Posts
645
Reaction score
744
Ram Year
2014 Ram 1500 4x4
Engine
5.7
Looks awesome!!
 
Top