reefguy89
Senior Member
im looking at a set of 17x9 rims with a -12 offset will these still allow me to clear 35x12.50 with no rubbing? I have no rubbing now with the 6" lift but not sure what the specs are on my rims other than they are 17x9.
Wheel Question need help quick
- Thread starter reefguy89
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
reefguy89
Senior Member
got pics of what the rim or my lift?
ok did some quick research and from what i can find -12 offset on a 9" wide rim is 4.5 backspacing. And from what i have seen most lifts recommend 4.5b.s.
Here's some comparo's for you regardless of wheel diameter: (pulled from a taco forum.)
10" wide, 4.5" BS= -24mm offset
--------, 5" BS= -12mm offset
9" wide, 4.5" BS= -12mm offset
--------, 5" BS= 0mm offset
--------, 4" BS= -24mm offset
8" wide, 4.5" BS= 0mm offset
--------, 5" BS= +12mm offset
--------, 4" BS= -12mm offset
Last edited:
