OnSale
5th Gen Crew
- Joined
- Nov 12, 2016
- Posts
- 3,218
- Reaction score
- 1,723
- Location
- Philadelphia, Pa
- Ram Year
- 2020
- Engine
- Hemi 5.7L
So I have an 06 with power driver only and I swapped in 04 power heat driver and passenger seats and now my air bag light is on and my seat belt light.
The air bag light is because the 04 seats don't have air bags.... is there a way to add a jumper and get this to turn off? If so which wires do I jump? Someone said adding a resistor to the wire would also work. Any advice?
As for the seat belt light, I've been told to just cut the plug off going to the belt plug and just connect those 2 wires and the light and chime will go off... is this correct?
Can anyone help me here with any kind of answers to these problems???
The air bag light is because the 04 seats don't have air bags.... is there a way to add a jumper and get this to turn off? If so which wires do I jump? Someone said adding a resistor to the wire would also work. Any advice?
As for the seat belt light, I've been told to just cut the plug off going to the belt plug and just connect those 2 wires and the light and chime will go off... is this correct?
Can anyone help me here with any kind of answers to these problems???