engine wont turn over. Just clicks once when i turn the key. Died on me going down the road. Checked battery, seems to be fine. Check cables and they are good. All fluid levels were good. Reset PCM and check fuses, they were all ok. Im stumped. Need help
Engine Wont start. All panel and lights work
- Thread starter duckewes
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Bob2013Ram1500
Member
- Joined
- Feb 9, 2014
- Posts
- 76
- Reaction score
- 7
- Ram Year
- 2013 black Crew Cab Express
- Engine
- Hemi 5.7
When ever that happened to my vehicles I would turn the headlights on and then try to start the car. If my headlights did not dim than I would clean the battery terminals and both cables. Most of the time it worked for me. You may want to try that first.
Redtruck-VA
Senior Member
- Joined
- Jun 29, 2010
- Posts
- 5,864
- Reaction score
- 984
- Location
- Virginia
- Ram Year
- 2003 & 1989 D250 RWD
- Engine
- Hemi-5.7, 5.9 12v & 24v diesel
I'd check grounds, fuses and relays.
Bob2013Ram1500
Member
- Joined
- Feb 9, 2014
- Posts
- 76
- Reaction score
- 7
- Ram Year
- 2013 black Crew Cab Express
- Engine
- Hemi 5.7
Check the spark plugs you may want to check the fuel filter or it may be the fuel pump. You may want to check out this youtube video. Hopefully you can fix the problem.
https://www.youtube.com/watch?v=BrqkhZmDnHQ
https://www.youtube.com/watch?v=BrqkhZmDnHQ
Gecko
Senior Member
- Joined
- Jan 26, 2014
- Posts
- 451
- Reaction score
- 72
- Location
- NJ
- Ram Year
- 2004, 2004
- Engine
- 5.7L Hemi, 8.3L V10
I would check your fuel pump. I had a similar problem a couple months ago. All electronics worked fine and the truck would turn over but not start. I had no fuel pressure and it turned out to be the pump.
