2 dual vc 4ohm to 1 ohm

Jwithing · Jul 25, 2017

Quick question. All the diagrams I see for this setup show wiring each sub @ 2ohms and wiring one sub to the other, then wiring that sub to the box terminals and terminals to amp. I finally got my foxbox, which is ported with separate enclosures. To complete this setup, can I wire both subs to 2 ohms to their individual terminals, then jumper the terminals together and finish with the amp to one of the terminals? This seems like it would be the same to me?

muscleram · Jul 25, 2017

Yes

Sent from my SM-G935W8 using Tapatalk

muscleram · Jul 25, 2017

Sounds like a nice setup

Sent from my SM-G935W8 using Tapatalk

muscleram · Jul 25, 2017

Sorry I know I said yes but if you do that you will run 2 ohm as final impedance. I initially read your post wrong

Sent from my SM-G935W8 using Tapatalk

muscleram · Jul 25, 2017

Which may not be a bad thing .
The amp I have I had it at 1 ohm then changed the setup and run at 2 ohms and it's much cleaner and solid. I think 1 ohm the amp gets out of control. Or at least the amp i have does. What kind of amp and is it hooked to factory head unit? And which one is that?

Sent from my SM-G935W8 using Tapatalk

muscleram · Jul 25, 2017

Hope this helps.
I see how it looks the same but I don't think it will be. I think you will end up with 2 ohms

Sent from my SM-G935W8 using Tapatalk

Jwithing · Jul 25, 2017

muscleram said:
Hope this helps.
I see how it looks the same but I don't think it will be. I think you will end up with 2 ohms

Sent from my SM-G935W8 using Tapatalk

That's the diagram I was using for reference. I'll be running the Rockford fosgate r1200-1D, which is supposed to be very clean w/ the pac amp pro.

I'm pretty annoyed with foxbox so far. It took 8 business days to ship when it's 3-5 on their site. They flat out ignored three emails. They shipped fed ex home delivery on a Friday, which doesn't deliver on Monday. Packaging was horrible. The undersides of the box doesn't sit flush once screwed in and then the ******* doesn't allow me to fold my rear seats down even after installing the shims under my seats! Really not looking forward to having to remove everything and try to reposition/recaulk the damn thing.

Jwithing · Jul 26, 2017

To be clear, picture 1 is what I was trying to describe. Someone on another forum somewhere with a similar topic said that picture two should work. Anybody able to confirm?

Jwithing · Jul 26, 2017

Nvm, answeredy own question by reading the instruction manual for the amp. There's two mounting blocks on the amp and I can run pic # 2 @ 1ohm with the subs wired @ 2ohm individually

2 dual vc 4ohm to 1 ohm

Jwithing

Senior Member

muscleram

Member

muscleram

Member

muscleram

Member

muscleram

Member

muscleram

Member

Jwithing

Senior Member

Jwithing

Senior Member

Attachments

Jwithing

Senior Member

Similar threads

Latest posts

Members online

Forum statistics

Share this page