4th Gen front door speaker wiring

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Skyjockey

Senior Member
Joined
Aug 22, 2012
Posts
343
Reaction score
94
Location
Lowell MA
Ram Year
2019 Warlock 4x4
Engine
3.6L
--------------------------------------------------------------------------------
last piece of the puzzle. How did you guys route the new front door speaker wires from the cab to the door? Looks like the factory rubber hose is a bulkhead connector with no way thru? Hate to drill new holes just for better wires?

Someone must have changed their wires?
 

Etroze86

Senior Member
Joined
Nov 4, 2012
Posts
4,807
Reaction score
860
Location
Grand Forks ND
Ram Year
2011
Engine
5.7 Hemi
its still a boot and you should be able to run wires through them cause i was able to on my 2011.
 

BlkRamRt

Senior Member
Joined
Jul 11, 2012
Posts
1,837
Reaction score
211
Location
SoCal
Ram Year
2012
Engine
HEMI 5.7
it should be easy i did it on mine. the boot on the doors has 2 screws remove them and you will be able to fish them through.
 

Thmupr

Member
Joined
May 12, 2014
Posts
60
Reaction score
3
Location
N. Texas
Ram Year
2014
Engine
Hemi 5.7
Here are some pics to help you out from when I wired my 2009. Should still be the same, my 2014 looks identical.

391266253.jpg


391266278.jpg


390235721.jpg
 
OP
OP
Skyjockey

Skyjockey

Senior Member
Joined
Aug 22, 2012
Posts
343
Reaction score
94
Location
Lowell MA
Ram Year
2019 Warlock 4x4
Engine
3.6L
Thanks !!
I'll take it apart this weekend. Looks like you got lucky and only have 1 of the 2 connectors populated so that sure does help! Now to get around the parking brake bracket?

It amazes me the size of this truck yet every audio component is jammed into the smallest corners?
 

Thmupr

Member
Joined
May 12, 2014
Posts
60
Reaction score
3
Location
N. Texas
Ram Year
2014
Engine
Hemi 5.7
Pull the wire in the gap between the gray connector and the wire outer housing. It will make sense when you look at it. I pulled 14ga wire through, but it's tight. 16 or 18 gauge would be much easier. Look at the third pic and you can see the speaker wire between the plastic parts of the connector. I used a piece of an old antenna to help pull the wire through the rubber bellows.
 
Top