Plowman254
Junior Member
- Joined
- May 29, 2015
- Posts
- 2
- Reaction score
- 0
- Ram Year
- 2015
- Engine
- 5.7
Want to add LED reverse lights to 2015 ram without a switch. Works great in acc mode, but not when truck is running. Any help would be great
LED Add on B/U lights
- Thread starter Plowman254
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Plowman254
Junior Member
- Joined
- May 29, 2015
- Posts
- 2
- Reaction score
- 0
- Ram Year
- 2015
- Engine
- 5.7
First wired each on off each stock BU light, then tried tagging two to one stock light and lastly ran a hot line from the battery to a relay which works but the relay "Humms" constantly
ChivasSTR8
Junior Member
I tapped from the 7 pin trailer harness for 2 additional back up LEDs. no problems on my 2015.
jadocs
Senior Member
- Joined
- Mar 23, 2014
- Posts
- 689
- Reaction score
- 140
- Ram Year
- 2014
- Engine
- 6.7
Not sure what you mean above. You ran the hot from the battery to relay and used the reverse as a trigger? or are you saying you wired the LED directly to the BU and are using a relay? I'm not sure what your final setup is.
sbarron
Senior Member
- Joined
- Feb 28, 2015
- Posts
- 3,362
- Reaction score
- 2,277
- Location
- Wasilla, Alaska
- Ram Year
- 2013
- Engine
- 5.7 HEMI
I have a build thread for this if you need. You can use the portion of the wiring digram that just pertains to the reverse lights.
http://www.ramforum.com/f41/bed_lig..._mount_reverse_light_install_pic_heavy-66687/
jadocs
Senior Member
- Joined
- Mar 23, 2014
- Posts
- 689
- Reaction score
- 140
- Ram Year
- 2014
- Engine
- 6.7
Great write up sbarron.
sbarron
Senior Member
- Joined
- Feb 28, 2015
- Posts
- 3,362
- Reaction score
- 2,277
- Location
- Wasilla, Alaska
- Ram Year
- 2013
- Engine
- 5.7 HEMI
thanks.
