Johnnyjet
Member
- Joined
- Oct 26, 2015
- Posts
- 71
- Reaction score
- 34
- Ram Year
- 2014
- Engine
- 5.7 HEMI
I installed the Mopar bed light kit today in my 2014 crew cab. The directions are fairly straight forward and all pictures no words. All was going great until the wiring part of the install. Apparently in 2013 Mopar changed the color and location of the wires in the harness. So instead of using the ones indicated in the instructions, use slot 11 for power and 16 for the ground. White wire to the yellow and purple, black to black. Hope this helps someone down the road.