dogcar3
Senior Member
- Joined
- May 16, 2012
- Posts
- 406
- Reaction score
- 132
- Ram Year
- 2012 Power Wagon
- Engine
- Hemi 5.7
Does anybody know where I can tap into the neutral safety signal on a 2012 Ram?
Neutral safety switch/wire/signal?
- Thread starter dogcar3
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
dogcar3
Senior Member
- Joined
- May 16, 2012
- Posts
- 406
- Reaction score
- 132
- Ram Year
- 2012 Power Wagon
- Engine
- Hemi 5.7
Bump.
Hasn't anybody tapped into this for remote start? I tried searching (here and Google) to no avail. I know I can find it on the transmission, but I was hoping for a more convenient location either in the cab or more accessible under the hood.
Hasn't anybody tapped into this for remote start? I tried searching (here and Google) to no avail. I know I can find it on the transmission, but I was hoping for a more convenient location either in the cab or more accessible under the hood.
OP
OP
dogcar3
Senior Member
- Joined
- May 16, 2012
- Posts
- 406
- Reaction score
- 132
- Ram Year
- 2012 Power Wagon
- Engine
- Hemi 5.7
OK, so I ended up just going to the large wire harness connector on the driver side of the transmission. The neutral signal wire is the yellow with dark blue strip in pin 23 (I believe?), which is the lower left if you are looking at the end of the connector so all the pin openings look like a 'T'.
