Pioneer sub with Metra adapter

13bentarm · Jul 16, 2017

Sorry in advance, searched and couldn't find any information. installing the pioneer sub, have the Metra harness. I know I gotta cut the connectors, just not sure the colors for + and -. I feel like I've seen a couple posts about the black being positive.

boomer632 · Jul 16, 2017

You don't cut any wires if you have the correct metra it just plugs in. I did pioneer sub and 3 infinity dash and didn't cut one wire.

13bentarm · Jul 16, 2017

The newer version has the studs that you push down and insert the bare end of the wire instead of the small/large clips.

baum · Jul 17, 2017

what harness are you talking about?

Witch · Jul 17, 2017

you have to trace them back to the harness to get the way the pins connect

then hook them up accordingly per the other thread

13bentarm · Jul 17, 2017

For anyone reading this...
Cut both slip on ends and strip 1" of wire on both the black and white. Black to black, white to red. Plug both adapters to stock harnesses. You must add the sub ring and then attach to the sub box. You will need to drill new holes, I believe only 2 lined up. Attach factory harnesses outside the box and re-install.

Witch · Jul 18, 2017

How did it come out ? Happy with the result ?

13bentarm · Jul 18, 2017

Meh, wasn't expecting much of an upgrade and didn't get one. I'm pretty sure that if someone got in the truck before and after they wouldn't notice a difference. 6x9's in rear door made much more of an impact.

Pioneer sub with Metra adapter

13bentarm

Junior Member

boomer632

Senior Member

13bentarm

Junior Member

baum

Senior Member

Witch

Senior Member

13bentarm

Junior Member

Witch

Senior Member

13bentarm

Junior Member

Similar threads

Latest posts

Members online

Forum statistics

Share this page