Hemi Motor TRQ Specs

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

KGBIGCOUNTRY

Senior Member
Joined
Jun 29, 2010
Posts
13,309
Reaction score
474
Location
MECH, VA
Ram Year
2004 RCSB/2005 QCSB
Engine
5.7 / 5.7
Here is the list for everything you need to TRQ your Hemi correctly
On a few its done in steps so its listed 1) 2) ect
Few of the bolts are also TRQ to yeild as the last step

Cam Gear bolt- 90 FT LBS
Timing Set bolts- 21 FT LBS
Rods- 1) 45 FT LBS 2) 60*
Mains M-12- 1) 28 FT LBS 2) 90*
Mains M-8- 1) 16 FT LBS
Main Cyclinder Head bolts- 1) 25 FT LBS 2) 40 FT LBS 3) 90*
Small Head bolts intake side- 1) 15 FT LBS 2) 25 FT LBS
Rocker Shafts- 195 IN LBS
Damper- 195 FT LBS
Exhaust- 23 FT LBS
Intake- 9 FT LBS
Lifter hold downs- 9 FT LBS
Oil Pump bolts- 21 FT LBS
Oil Pan bolts- 9 FT LBS
Front Cover- 21 FT LBS
Flywheel- 70 FT LBS
 

S0CAL

US Marine Veteran
Supporting Member
Military
Joined
Feb 3, 2016
Posts
3,207
Reaction score
3,519
Location
The Lonestar State
Ram Year
2021 Limited Longhorn CTD HO DRW 4x4
Engine
Cummins 6.7L HO
Cross-post (I know) but chassis torque specs to have for reference,
here
 
Top