Trouble code list recals and TSB's

Recall 07v093000: Tire label

Nhtsa campaign #: 07v093000
make: Dodge
model: Ram 2500
year: 2007
mfr campaign #: G10
component description: Equipment : other:labels
manufacturer: Daimlerchrysler corporation
begin date of manufacturing: 20061127
end date of manufacturing: 20061222
potential # of units affected: 3282
date owner notified by mfr: 20070312
manufacturers of recalled vehicles/products: Chrysler group llc
report received date: 20070312
record creation date: 20070312
regulation part #: 571
federal motor vehicle safety standard #: 120
defect summary:
Certain 4x4 trucks with diesel engines fail to conform to the requirements of federal motor vehicle safety standard no. 120, certain 4x4 trucks with diesel engines fail to conform to the requirements of federal motor vehicle safety standard no. 120, "tire selection and rims for motor vehicles other than passenger cars." the certification label, tire and loading information label and supplemental tire pressure information label contain incorrect tire inflation pressure information.

Consequence summary:
Improper tire inflation pressure can cause tire failure and result in a crash without warning.

Corrective summary:
Dealers will install the correct certification label overlay free of charge. The recall began on march 12, 2007. Owners may contact daimlerchryler at 1-800-853-1403.

Recall notes:
Daimlerchrysler recall no. G10.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to Home | Safercar -- National Highway Traffic Safety Administration (NHTSA).

Recall 07v247000: Fuel tank shield

Nhtsa campaign #: 07v247000
make: Dodge
model: Ram 2500
year: 2007
mfr campaign #: G16
component description: Fuel system, gasoline:storage
manufacturer: Daimlerchrysler corporation
begin date of manufacturing: 20060425
end date of manufacturing: 20070423
potential # of units affected: 5062
date owner notified by mfr: 20070618
manufacturers of recalled vehicles/products: Chrysler group llc
report received date: 20070613
record creation date: 20070617
regulation part #: 571
federal motor vehicle safety standard #: 301
defect summary:
Certain pickup trucks equipped with 34 gallon fuel tanks fail to comply with the requirements of federal motor vehicle safety standard no. 301, "fuel system integrity." the fuel tank may become damaged during certain crash conditions, which could allow fuel leakage to occur if the vehicle rolls over.

Consequence summary:
Fuel leakage, in the presence of an ignition source, could result in a fire.

Corrective summary:
Dealers will install a fuel tank shield onto the front frame cross member. The recall began on june 12, 2007. Owners may contact daimlerchrysler at 1-800-853-1403.

Recall notes:
Daimlerchrysler recallno. G16.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to Home | Safercar -- National Highway Traffic Safety Administration (NHTSA).

Recall 07v413000: Front driveshaft yoke

Nhtsa campaign #: 07v413000
make: Dodge
model: Ram
year: 2007
mfr campaign #: G32
component description: Power train:driveline:driveshaft
manufacturer: Daimlerchrysler corporation
begin date of manufacturing: 20060701
end date of manufacturing: 20061106
potential # of units affected: 1498
date owner notified by mfr: 20071022
manufacturers of recalled vehicles/products: Chrysler group llc
report received date: 20070912
record creation date: 20070912
regulation part #:
Federal motor vehicle safety standard #:
Defect summary:
On certain two wheel drive trucks equipped with manual transmissions, the front driveshaft yoke may break under certain driving conditions.

Consequence summary:
This could result in a loss of vehicle control and cause a crash without warning.

Corrective summary:
Dealers will replace the driveshaft free of charge. The recall began on october 22, 2007. Owners may contact daimlerchrysler at 1-800-853-1403.

Recall notes:
Daimlerchrysler recall no. G32. Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to Home | Safercar -- National Highway Traffic Safety Administration (NHTSA).

Recall 07v472000: Fuel tank straps

Nhtsa campaign #: 07v472000
make: Dodge
model: Ram 3500
year: 2007
mfr campaign #: G34
component description: Fuel system, gasoline:storage:tank assembly
manufacturer: Daimlerchrysler corporation
begin date of manufacturing: 20060224
end date of manufacturing: 20070628
potential # of units affected: 548
date owner notified by mfr: 20071112
manufacturers of recalled vehicles/products: Chrysler group llc
report received date: 20071009
record creation date: 20071009
regulation part #:
Federal motor vehicle safety standard #:
Defect summary:
On certain cab/chassis pickup trucks equipped with an optional 23 gallon fuel tank, the fuel tank straps were improperly manufactured and could separate. This can cause the fuel tank to loosen and leak fuel.

Consequence summary:
Fuel leakage in the presence of an ignition source can result in an underbody fire.

Corrective summary:
Dealers will replace the fuel tank retention straps and fasteners free of charge. The recall began on november 12, 2007. Owners may contact daimlerchrysler at 1-800-853-1403.

Recall notes:
Daimlerchrysler recall no. G34.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to Home | Safercar -- National Highway Traffic Safety Administration (NHTSA).

Recall 08v344000: Trailer hitches

Nhtsa campaign #: 08v344000
make: Dodge
model: Ram 3500, 5500
year: 2007, 2008
mfr campaign #: Trailer hitches
component description: Knapheide manufacturing company
manufacturer: 20061023
begin date of manufacturing: 20080715
end date of manufacturing: 108
potential # of units affected: 20080815
date owner notified by mfr: 20080728
manufacturers of recalled vehicles/products: Chrysler group llc
report received date: 20080729
record creation date:
Regulation part #:
Federal motor vehicle safety standard #:
Defect summary:
Knapheide is recalling 108 my 2006-2008 pro series truck beds equipped with an icc bumper which included a provision for a ball hitch. There may be an insufficient weld attaching the hitch channel to the supporting structure.

Consequence summary:
This could result in bending of the hitch channel or the hitch could be pulled off the vehicle, increasing the risk of a crash.

Corrective summary:
Knapheide will offer two remedies to its customers: (1) for those customers who do not use the hitch, the hitch will be removed from the truck bed and replaced with an icc bumper; or (2) for those customers who need a hitch, a receiver hitch assembly will be added to the existing hitch assembly and all suspect weld joints will be re welded. The recall began on august 15, 2008. Owners may contact knapheide at 1-877-473-5763.

Recall notes:
Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to Home | Safercar -- National Highway Traffic Safety Administration (NHTSA).

Recall 08v641000: Silencer pad

Nhtsa campaign #: 08v641000
make: Dodge
model: Ram 2500, 3500
year: 2007, 2008
mfr campaign #: H34
component description: Engine and engine cooling:engine:diesel
manufacturer: Chrysler llc
begin date of manufacturing: 20070101
end date of manufacturing: 20071105
potential # of units affected: 108429
date owner notified by mfr: 20090126
manufacturers of recalled vehicles/products: Chrysler group llc
report received date: 20081205
record creation date: 20081205
regulation part #:
Federal motor vehicle safety standard #:
Defect summary:
Chrysler is recalling 108,429 my 2007-2008 dodge ram 2500 and 3500 pickup trucks equipped with 6.7l diesel engines. A silencer pad can sag and contact the exhaust gas recirculation (egr) cooler.

Consequence summary:
This could result in an engine compartment fire.

Corrective summary:
Dealers will add a bracket to support the engine compartment silencer pad adjacent to the egr cooler. The recall is expected to begin during december 2008. Owners may contact chrysler at 1-800-853-1403.

Recall notes:
Chrysler recall no. H34.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to Home | Safercar -- National Highway Traffic Safety Administration (NHTSA).

Recall 09e001000: Steering linkage

Nhtsa campaign #: 09e001000
make: Dodge
model: Ram
year: 2003, 2004, 2005, 2006, 2007, 2008
mfr campaign #: H46
component description: Steering:linkages
manufacturer: Chrysler llc
begin date of manufacturing:
End date of manufacturing:
Potential # of units affected: 18000
date owner notified by mfr: 20090606
manufacturers of recalled vehicles/products: Chrysler group llc
report received date: 20090113
record creation date: 20090115
regulation part #:
Federal motor vehicle safety standard #:
Defect summary:
Chrysler is recalling 18,000 aftermarket steering linkages used for service on some my 2003 through 2008 dodge ram heavy duty pickup trucks. The subject linkages may experience drag link inner tie rod to pitman arm ball stud fracture, also, the steering linkage damper attaching bracket may yeild and shift on the linkage. The part numbers of the affected assemblies is 52122362aa through 52122362ad.

Consequence summary:
This could result in a loss of steering control and the restricted ability to turn the vehicle in one direction increasing the risk of a crash without warning.

Corrective summary:
Dealers will replace the steering linkage drag link inner tie rod end assembly, and inspect the steering linkage damper bracket free of charge. The recall began on june 6, 2009. Owners may contact chrysler at 1-800-853-1403.

Recall notes:
Chrysler recall no. H46.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go tohttp://www.safercar.gov .

Recall 09e009000: Windshield wiper modules

Nhtsa campaign #: 09e009000
make: Dodge
model: Ram
year: 2003, 2004, 2005, 2006, 2007, 2008
mfr campaign #: J11
component description: Visibility:windshield wiper/washer
manufacturer: Chrysler llc
begin date of manufacturing:
End date of manufacturing:
Potential # of units affected: 1364
date owner notified by mfr: 20090828
manufacturers of recalled vehicles/products: Chrysler group llc
report received date: 20090313
record creation date: 20090313
regulation part #:
Federal motor vehicle safety standard #:
Defect summary:
Chrysler is recalling 1,364 windshield wiper modules, p/n 55077098aj, sold during the 2008 and 2009 calendar year for use as aftermarket replacement equipment on my 2002-2009 dodge ram pickup trucks. These wiper module assemblies may be susceptible to water intrusion that could result in partial or complete loss of windshield wiper capability.

Consequence summary:
When the wiper system fails, the operator will have reduced visibility which could result in a crash.

Corrective, summary:
Dealers will replace the wiper module assemblies with vented wiper motor housings free of charge. The safety recall began on august 28, 2009. Owners may contact chrysler at 1-800-853-1403.

Recall notes:
Chrysler's recall no. J11.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go tohttp://www.safercar.gov .

Recall 09e012000: Combination corner and bumper lamp assemblies

Nhtsa campaign #: 09e012000
make: Dodge
model: Ram
year: 2003, 2004, 2005
mfr campaign #:
Component description: Exterior lighting
manufacturer: Sabersport
begin date of manufacturing:
End date of manufacturing:
Potential # of units affected: 16270
date owner notified by mfr: 20090511
manufacturers of recalled vehicles/products: Chrysler group llc
report received date: 20090407
record creation date: 20090407
regulation part #: 571
federal motor vehicle safety standard #: 108
defect summary:
Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.

Consequence summary:
Decreased lighting visibility may result in a vehicle crash.

Corrective summary:
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on may 11, 2009. Owners may contact sabersport at 1-909-598-7589.

Recall notes:
This recall only pertains to aftermarket replacement equipment and has no relation to any original equipment installed on vehicles produced by the vehicle manufacturer.in order to determine if your aftermarket lamp assembly is affected by this noncompliance, please review the list of model numbers provided to us by sabersport.the list can be found under "document search" located at the bottom of your screen.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go tohttp://www.safercar.gov .

Recall 09v005000: Tie rod assembly

Nhtsa campaign #: 09v005000
make: Dodge
model: Ram 2500, 3500
year: 2008, 2009
mfr campaign #: H36
component description: Steering:linkages:tie rod assembly
manufacturer: Chrysler llc
begin date of manufacturing: 20080229
end date of manufacturing: 20081103
potential # of units affected: 32782
date owner notified by mfr: 20090216
manufacturers of recalled vehicles/products: Chrysler group llc
report received date: 20090109
record creation date: 20090109
regulation part #:
Federal motor vehicle safety standard #:
Defect summary:
Chrysler is recalling 32,782 my 2008-2009 dodge ram 2500, 3500 and 3500 cab chassis pickup trucks equipped with powers and sons steering linkage. The steering linkage drag link inner tie rod to pitman arm ball stud may fracture. Also the steering linkage damper attaching the bracket may yield and shift on the linkage.

Consequence summary:
This could result in a loss of steering control and the restricted ability to turn the vehicle in one direction increasing the risk of a crash without warning.

Corrective summary:
Dealers will replace the steering linkage drag link inner tie rod end assembly, and inspect the steering linkage damper bracket free of charge. The recall is expected to begin on or before february 16, 2009. Owners may contact chrysler at 1-800-853-1403.

Recall notes:
Chrysler recall no. H36.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go tohttp://www.safercar.gov .

Recall 09v084000: Windshield wiper module motor assembly

Nhtsa campaign #: 09v084000
make: Dodge
model: Ram
year: 2008
mfr campaign #: J10
component description: Visibility:windshield wiper/washer:motor
manufacturer: Chrysler llc
begin date of manufacturing: 20080414
end date of manufacturing: 20081024
potential # of units affected: 65896
date owner notified by mfr: 20090817
manufacturers of recalled vehicles/products: Chrysler group llc
report received date: 20090313
record creation date: 20090312
regulation part #:
Federal motor vehicle safety standard #:
Defect summary:
Chrysler is recalling 65,896 my 2008-2009 light and heavy duty dodge ram pickup trucks. The windshield wiper module motor assembly may be susceptible to water intrusion that could result in partial or complete loss of windshield wiping capability.

Consequence summary:
When the wiper system fails, the operator will have reduced visibility which could result in a crash.

Corrective summary:
Dealers will replace the wiper module assemblies with vented wiper motor housings free of charge. The safety recall began on august 17, 2009. Owners may contact chrysler at 1-800-853-1403.

Recall notes:
Chrysler recall no. J10.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go tohttp://www.safercar.gov .

Recall 10e013000: Replacement pitman arm

Nhtsa campaign #: 10e013000
make: Dodge
model: Ram
year: 2003, 2004, 2005, 2006, 2007, 2008
mfr campaign #:
Component description: Steering:gear box:shaft pitman
manufacturer: Fabtech motorsports
begin date of manufacturing:
End date of manufacturing:
Potential # of units affected: 1500
date owner notified by mfr: 20100524
manufacturers of recalled vehicles/products: Chrysler group llc
report received date: 20100503
record creation date: 20100503
regulation part #:
Federal motor vehicle safety standard #:
Defect summary:
Fabtech is recalling certain aftermarket replacement pitman arms, p/nos. Fts93001 and ft44039, installed for use on certain 2003 through 2008 dodge 2500 4wd, 3500 4wd, and 1500 4wd mega cab vehicles. The pitman arm can fracture and break away from the steering box causing total loss of steering control.

Consequence summary:
Steering loss could result in a vehicle crash possibly resulting in property damage, injury or death.

Corrective summary:
Fabtech will notify owners and authorized installers will inspect for defective pitman arm and replace if necessary free of charge. The safety recall began on may 24, 2010. Owners may contact fabtech at 1-877-432-2832.

Recall notes:
This recall only pertains to aftermarket fabtech replacement pitman arms and has no relation to any original equipment installed on dodge 2500, 3500, and 1500 vehicles manufactured by chrysler group, llc.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go tohttp://www.safercar.gov .

Recall 10e040000: Wheel hub assemblies

Nhtsa campaign #: 10e040000
make: Dodge
model: Ram 1500
year: 2003, 2004, 2005, 2006, 2007, 2008
mfr campaign #:
Component description: Wheels:cap/cover/hub
manufacturer: Federal-mogul corporation
begin date of manufacturing:
End date of manufacturing:
Potential # of units affected: 34604
date owner notified by mfr:
Manufacturers of recalled vehicles/products: Chrysler group llc
report received date: 20100823
record creation date: 20100823
regulation part #:
Federal motor vehicle safety standard #:
Defect summary:
Federal-mogul is recalling certain carquest, national, and percision brand wheel hub assemblies, p/nos 515073 and 515073, sold for use as replacement equipment on model year 2002 through 2008 dodge ram 1500 pickup trucks. The inboard roll form used to maintain the hub assembly can fatigue resulting in noise and/or wheel separation on the two wheel drive (2wd) applications. The risk of these issues do not occur on the four wheel drive (4wd) applications, and installation on the 4wd applications are not part of this recall.

Consequence summary:
A vehicle crash can occur if the wheel separates from the vehicle.

Corrective summary:
Federal-mogul will notify owners of record and technicians will replace the affected hub assemblies free of charge. The safety recall is expected to begin during september 2010. Owners may contact federal-mogul at 1-877-489-6659.

Recall notes:
This recall only pertains to replacement carquest and national wheel hub assemblies and has no relation to any original equipment installed on dodge ram 1500 vehicles manufactured by chrysler llc.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go tohttp://www.safercar.gov .

how to check codes with no scanner

i have a 3rd gen ram and i have gotten a check engine light. theres a simple way of doing it without a scanner all you have to do is put the key in the ignition and turn it to the on and off position 3 times(dont start it) the 3rd time forward if there is a code it will display it on your odometer rescan again and either give you more codes (if multiple codes) or say done even if there are no codes itl just say done on the this can also work on the 02 generation jeep products that i know of and possibly newer year rams too

Good info

That's awesome! Thanks for the tip

via DroidX (Tapatalk)

The key trick, on, off, on, off, on, quickly will tell the computers to display the error codes in the odometer window. When you do this, make sure to have a piece of paper and pen ready. If there are no codes you will see a PdOnE and an EdOnE and they will look like this. The key trick does work on most Chrysler products, yet those before 2001 it may only show the P codes and not the E codes. I am not sure if the key trick will work on other makes of vehicles.

Good to know! Thank ya!

Thats some good info

I am going to stick this as this is great info !
THNAKS for the info .