Calling all guys!! i need a little help.....

Rebel_Lady91 · May 6, 2011

i am working on my truck and i have 3 stubburin' bolts that want come loose and they are stripped, im out of WD-40..any ideas????

Rebel_Lady91 · May 6, 2011

and the bolts are round and they are the kind use have to use a star bit...

0212353 · May 6, 2011

2 grunts and a good fart always seem to work for Rubberfrog.

WD-40 can't hurt though, or a penetrating spray. Where are the bolts at?

txbass06 · May 6, 2011

You might have to use a screw extractor to get those out depending on what they're for and where they're at

Sent from my iPhone 4 using Tapatalk

Rebel_Lady91 · May 6, 2011

lol i keep RubberFrog idea in mind for a back up plan, if nothing wat work, the bolts are located on the bottom of my front bummer, im taking my air dam off so my truck look a little lifted up front..

glass3222 · May 6, 2011

do you have a oxyacetylene torch? If so heat the bolt a little then loosen, works much better than WD40

bigtigga84 · May 6, 2011

Cut em and get new bolts

Rebel_Lady91 · May 6, 2011

im thinking about cutting the, they getting on my last nerve..lol

KGBIGCOUNTRY · May 6, 2011

Cutting is the quickest way, a alonger way would be to get em drilled out then pulled with an ez-out. If they are not flush you might be able to get a bite on them with vise grips and get them out that way.

Rebel_Lady91 · May 6, 2011

thanks!

bigtigga84 · May 6, 2011

Lol I love angle grinders

Rebel_Lady91 · May 6, 2011

yea they are great

txbass06 · May 6, 2011

You should be able to get a grip on them with a pair of vise grips and get them out. I had to do that to a couple when I pulled my air dam off for the bull bar

Sent from my iPhone 4 using Tapatalk

Rebel_Lady91 · May 6, 2011

thanks! i'll give them a try...

adamwilkes14 · May 6, 2011

That or just pull real hard and they will just slide out of the plastic air dam...If you dont mind the air dam not being able to be reinstalled...

Rebel_Lady91 · May 6, 2011

well i dont have any vise grips i broke them a while back.. well im screwed....

adamwilkes14 · May 6, 2011

are any of the screws out of the air dam at all to where you can grab onto it and pull?

Rebel_Lady91 · May 6, 2011

yea there are only 3 screws left in the air dam

txbass06 · May 6, 2011

Adam is basically telling you to rip the rest of it off lol

ramhunter9 · May 6, 2011

grind them ******* off ....

Calling all guys!! i need a little help.....

Senior Member

Senior Member

Vendor

Supporting Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Supporting Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Supporting Member

Senior Member

Similar threads

Forum statistics

Share this page