Control arm woes

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

montrese04

Junior Member
Joined
Dec 12, 2013
Posts
20
Reaction score
0
Location
somwhere, In
Ram Year
1999 single cab 4x4
Engine
5.9L
Driver side control arm has a whole lot of slop in it. I'm trying to figure out exactly what I need to replace in order to get it firm again. https://vimeo.com/194376064

Sent from my HTC One_M8 using Tapatalk
 

Max78

Senior Member
Joined
Jul 20, 2016
Posts
111
Reaction score
14
Location
AZ
Ram Year
1998
Engine
Magnum 5.9
Hard to tell from the small video and angle but it looks to me that all that slop is in the upper and lower ball joints. . .
 
OP
OP
montrese04

montrese04

Junior Member
Joined
Dec 12, 2013
Posts
20
Reaction score
0
Location
somwhere, In
Ram Year
1999 single cab 4x4
Engine
5.9L
OK that seems logical seeing as I can see in the video that's where most the movement is at

Sent from my HTC One_M8 using Tapatalk
 
OP
OP
montrese04

montrese04

Junior Member
Joined
Dec 12, 2013
Posts
20
Reaction score
0
Location
somwhere, In
Ram Year
1999 single cab 4x4
Engine
5.9L
OK that seems logical seeing as I can see in the video that's where most the movement is at. Guess I will be rebuilding the front end completely.

Sent from my HTC One_M8 using Tapatalk



Sent from my HTC One_M8 using Tapatalk
 
Top