Add a Leaf Helper Springs 3500# for Dodge 2500

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DodgeTx

Senior Member
Joined
Apr 29, 2015
Posts
899
Reaction score
244
Location
SEGUIN
Ram Year
2001
Engine
5.9L Cummins, 5.2l v8
Has anyone installed these, or know someone who has? or Super Springs Add a Leaf ETC

https://www.suspensionconnection.com/3520-300d.html

Wanting to put these on my 2500 to help support cars with the minuteman slide in Wrecker unit. Springs are almost level right now.

Opinions on these? Seem cheaper than competitors and more load capacity.
 

Attachments

  • Screen Shot 2017-04-20 at 12.38.25 PM.jpg
    Screen Shot 2017-04-20 at 12.38.25 PM.jpg
    37.6 KB · Views: 30

Gr8bawana

Senior Member
Joined
Dec 7, 2015
Posts
1,281
Reaction score
1,078
Ram Year
2017
Engine
6.7 CTD
I put a set of those on my truck because it used to settle way down when I towed my trailer.
What I like about them is that you can adjust them so they only add support when your springs need it. I set mine to where the cross bar on the shakle was just touching the spring. You can also use them to lift you spring up a little but I found it makes for a very stiff ride.
 

bcbouy

Senior Member
Joined
Nov 12, 2014
Posts
1,730
Reaction score
1,184
Location
pitt meadows/100 mile house
Ram Year
2021 power wagon
Engine
hemi
i run 5000# supersprings as well as firestone ride rites.it's a progressive ,same as the hellwig but a single spring on rollers.works fantastic.
 
OP
OP
DodgeTx

DodgeTx

Senior Member
Joined
Apr 29, 2015
Posts
899
Reaction score
244
Location
SEGUIN
Ram Year
2001
Engine
5.9L Cummins, 5.2l v8
Thank you for the replies, I did not know they were adjustable like that, thats awesome!

BC can you link me to the 5000# ones? are they 3 inch wide?
 

dudeman2009

Senior Member
Joined
Feb 9, 2016
Posts
1,562
Reaction score
208
Location
Arizona
Ram Year
2001 1500 Sport with enough electrical modifications to make my brain hurt
Engine
Magnum 360
I've used them, there are a bunch of brands, but i'd only buy reputable ones. I've seen too many cheap sets snap either the spring itself, or the ubolts that hold it.

As was mentioned, you can set them up to have little to no assist when unloaded, or have a bit of preload. Just understand with any spring, it takes a bit of movement before full support is achieved. I set mine up before I replaced the packs to about an inch of preload. It didn't change the ride much when unloaded, but when I put trailers on it dropped about an inch less than before.
 
OP
OP
DodgeTx

DodgeTx

Senior Member
Joined
Apr 29, 2015
Posts
899
Reaction score
244
Location
SEGUIN
Ram Year
2001
Engine
5.9L Cummins, 5.2l v8
Does anyone have a good brand they've used, or links to any that are cheaper with a warranty just in case?
 
Top