Anyone running a Skyjacker dual steering stabilizer?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

raven28690

Junior Member
Joined
Mar 30, 2014
Posts
8
Reaction score
1
Location
Valdese, NC
Ram Year
1999
Engine
5.2
Installed one on my 99 1500 today and Im not quite sure I got the tie rod brackets mounted right.
Was hopeing someone else had one on a 1500 and could throw some pics up.
If not I will try and take some shots of mine maybe tomorrow and see what everyone thinks although all I have is a lousy cell phone camera.
 
OP
OP
raven28690

raven28690

Junior Member
Joined
Mar 30, 2014
Posts
8
Reaction score
1
Location
Valdese, NC
Ram Year
1999
Engine
5.2
The passenger side stabilizer you can see the bushing is sitting at an angle in the stabilizer due to the mount angle of the bracket so Im really unsure of it.
The driver side Im not sure about either. The part of the tie rod where I mounted the bracket was the widest part of the tie rod that the U joint would tighten up at. Anywhere else and I would have had to use washers to tighten it up.
The instructions was a little vague but said 19" from eye to eye. The passenger side is very close to that but the driver side is a few inches more.
No binding though as far as I can tell.
Did a test drive today and it felt like there was some play on the passenger side tire that I have never felt before.

P041114_1901_zps0f3d1503.jpg

P041114_190101_zps8e6ad6c9.jpg

P041114_190201_zpsdbd9d11e.jpg

P041114_1902_zps0a93e28b.jpg
 
Top