New coil springs and lift

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

RangerWeaver

Senior Member
Joined
Nov 20, 2014
Posts
1,955
Reaction score
646
Location
Lancaster Pennsylvania
Ram Year
2011
Engine
V8 4.7L
I'm looking to add a 3-4 inch lift to my ram. But my coil springs are worn out and sagging.
Any ideas on what springs I should get. FYI I'm strapped for cash due to excessive bills
 

Johnn123

Senior Member
Joined
Sep 23, 2013
Posts
2,090
Reaction score
1,099
Location
Ontario
Ram Year
2010
Engine
5.7L Hemi
3" is max before you need control arms so on a budget, stay 3" or below.

You could get v10 springs, ORE springs, aftermarket 2" lift springs, or the debatable diesel springs (some people say dont use them because a magnum wont compress them enough, but Ive also seen people do it with no issue. No further comments, Im not getting into another debate with people over that). For the rear, a 2" or 3" long add-a-leaf will do the trick just fine.

V10 springs would probably be the easiest and cheapest, could prob snag a pair at a junk yard. Or this kit may fit the bill for ya. 2.5" front and rear.
 

Merc225hp

Senior Member
Joined
Jan 13, 2013
Posts
5,145
Reaction score
3,130
Location
NA
Ram Year
truck
Engine
gas
Johnn123 he is 2wd so no ORE, but 2wd V10 springs or dsl springs would work like you posted.
 

Johnn123

Senior Member
Joined
Sep 23, 2013
Posts
2,090
Reaction score
1,099
Location
Ontario
Ram Year
2010
Engine
5.7L Hemi
Johnn123 he is 2wd so no ORE, but 2wd V10 springs or dsl springs would work like you posted.

Ope I assumed he was a 4wd. My bad. OP that link I posted, the rear leafs would work but I dont think the front springs will. They do sell those separately!
 

ADudeOnSkis

Senior Member
Joined
Oct 28, 2014
Posts
396
Reaction score
226
Location
Truckee, CA
Ram Year
1999
Engine
318/5.2 Magnum
I just assume all trucks are 4x4...

OP v10 springs would probably be your best bet, or CTD springs (cummins turbo diesel)
 

96DodgeRam4x4

Junior Member
Joined
Jun 12, 2014
Posts
9
Reaction score
3
Ram Year
1996
Engine
5.9 Magnum
Long add-a-leafs are the best way to go for the rear but since you have a tight budget, blocks will do just fine, especially cause you're only 2wd im sure you wont be doing anything crazy offroad. If I were you id do 3in front 2in rear.
 

jfinch83

Junior Member
Joined
Dec 25, 2014
Posts
1
Reaction score
1
Ram Year
2007
Engine
5.7 hemi
I know for under 400 I got shocks front and back came with adjustable plate for your coil spring to sit on I just wanted mine leveled tho but it lifted the front about 2.5
 
Top