Hubbard george
Junior Member
- Joined
- Aug 23, 2017
- Posts
- 1
- Reaction score
- 0
- Ram Year
- 1995
- Engine
- V10
I have tried and tried to remove the old crank sensor. It just comes off in bits and pieces. Any hints???
Removing crank sensor from my 1995 Dodge Ram v10
- Thread starter Hubbard george
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
dudeman2009
Senior Member
- Joined
- Feb 9, 2016
- Posts
- 1,562
- Reaction score
- 208
- Location
- Arizona
- Ram Year
- 2001 1500 Sport with enough electrical modifications to make my brain hurt
- Engine
- Magnum 360
Don't hit it with a hammer to get it out 
But really, if its original the plastic is going to be brittle, however it should just come out, you may have a bolt still in the sensor holding it in, or it may have had dirt impacted and holding it in. Soak the area with penetrating oil and let it sit for a few minutes then try again. It should come out as an assembly not in pieces.
But really, if its original the plastic is going to be brittle, however it should just come out, you may have a bolt still in the sensor holding it in, or it may have had dirt impacted and holding it in. Soak the area with penetrating oil and let it sit for a few minutes then try again. It should come out as an assembly not in pieces.
Similar threads
Members online
- Michael Phipps
- Matt6041
- WY-Dave
- Mike Flea
- Joshua Collins
- Rebel Guy
- JW2 Innovations
- rzr6-4
- 1Willed
- Ken226
- jagu366
- truck2014
- Curmudgeon
- NLRamSport
- Fritter
- KeithP
- Fake-Account27
- Lyle Pollock
- Zyphyon
- Bricvic
- Black1500Ram
- StateOfMind
- Lsujker
- Heatheroo
- RebelDad
- i_Squared_r
- KansasArt
- Robert Nims
- stevenP
- Wile E Coyote Jr
- samsdad02
- HEMIMANN
- star_deceiver
- Tom Davis
- Warlock2024
- nsBoost
- nascar72
- Shylo1990
- Roper46
- PA Ram
- Jeph430
- PaleFlyer
- bskl76
- zrock
- Dan Topp
- DAK2
- Dinky
- Dillonh
- Delarge805
- 2003F350