Bulb list for 4th gens

AFMoulton · Oct 13, 2017

Salsa said:
I have a 2017 1500 express that calls for 194 bulbs in the 2 license plate holders. I'm not sure what is up with mine. When I untwist the housing, I can then remove a gray 90 degree elbow from a black connector. I can't however seem to get the bulb out of the gray elbow without feeling like I'll break it. Any ideas on what may be going on? I'd post a pic but can't seem to be able to do that either.

It’s just tough, I felt the same way, it will come out

Sent from my iPhone using Tapatalk

Salsa · Oct 13, 2017

AFMoulton said:
It’s just tough, I felt the same way, it will come out

Sent from my iPhone using Tapatalk

Thanks. I'll order the bulbs and jerk out the stock when the LED's come in. Lol

teamramrod215 · Dec 20, 2017

Salsa said:
Thanks. I'll order the bulbs and jerk out the stock when the LED's come in. Lol

I ended up using a pair of pliers to pull mine out. as AFMoulton said...they are snug...but they will come out

Graygoose · Dec 20, 2017

Saw a video on Diode Dynamics, they wrapped it (the bulb) in tape, and pulled it out.

Deepc6 · Jan 18, 2018

I purchased a set of 921 for my 2016 RAM 1500 Limited reverse bulbs. They base which goes in the socket is to small. After reading around I see some people have used 7440 and 7443 can someone confirm which bulb it actually is?

Thank You

1stHEMI · Jan 26, 2018

Well, I just took my headlights out, everything states that the 2017 RAM Sport with Projector lights is a 2012 bulb, it's not on mine. The low beam (Projector bulb) is a HB3/9005, and the high beam is the same bulb. So it's kind of odd that so many people have different bulbs. I do have outer (Projector - low beam) and inner (standard - high beam). I guess it's time to reorder bulbs. I'm not going to cut the base, it's easier to replace it or the entire bulb and get the correct one.

Gordinho80 · Jan 30, 2018

blackout11 said:
Map lights - 921

An admin may want to update the first post, as it seems the OP hasn't been active in a while.

There is no way of fitting a 921 into the assembly... at least this is the case in my 2012 1500. A 921 sticks down way too far and the lens won't pop back on. My truck definitely has 194s in the map lights.

Miron Kuzma · May 24, 2018

Does the 4th GEN around 2011 have only two bulbs in rear tail lights? I am importing 2011 RAM 1500 from US and wonder how the tail lights work. Seems it has only reverse bulb and a bulb for brake and turn lights. Does it have regular (position) red tail light so that the vehicle back is visible at night?

Tom88 · May 24, 2018

Miron Kuzma said:
Does the 4th GEN around 2011 have only two bulbs in rear tail lights? I am importing 2011 RAM 1500 from US and wonder how the tail lights work. Seems it has only reverse bulb and a bulb for brake and turn lights. Does it have regular (position) red tail light so that the vehicle back is visible at night?

Yes same bulb is your tail lights at night.

Sent from my iPhone using Tapatalk

bigkyle72 · May 31, 2018

thanks for this!

Joshua Campbell · Jun 13, 2018

Thanks for the info

Sent from my iPhone using Tapatalk

WTM75 · Jun 21, 2018

Using info on this forum, Boosted Motorsports and some other youtube videos, i changed out some bulbs on my 2017 Ram 1500. So far no problems!

https://www.amazon.com/gp/product/B01EJKIUP8/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Reverse Lights
Cargo Lights
3rd Brake lights

https://www.amazon.com/gp/product/B0142WSTJA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Passenger Light in back seat

https://www.amazon.com/gp/product/B071GBJ9ZH/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Fog Lights

https://www.amazon.com/gp/product/B00JRE38EA/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Map Lights
Licence Plate Lights
Wheel Well Lights

All these bulbs were plug & play, I did nothing other than plug them in and I have had no warning lights or any other problems, It has been about a month now. Thinking about doing my headlights next

RAMTRPR · Jun 21, 2018

When looking at the Luyed LED bulbs should we be using the Non-Polarity ones or normal ones?

2009 QCSB 4WD - Not Stock [emoji41]

Sent from my iPhone using Tapatalk Pro

WTM75 · Jun 21, 2018

BigRam1411 said:
When looking at the Luyed LED bulbs should we be using the Non-Polarity ones or normal ones?

2009 QCSB 4WD - Not Stock [emoji41]

Sent from my iPhone using Tapatalk Pro

I bought the ones linked in my post above, which I believe was link from Boosted Motorsports. I’m not sure if they are non-polarity or not, I put them in and they worked. No codes.

GatheredEarth · Jun 22, 2018

no codes either for the fog lights?

WTM75 · Jun 22, 2018

GatheredEarth said:
no codes either for the fog lights?

I've gotten no codes. Did not install anything other than the bulb. It's been about a month now, everything is working good.

Headcase · Jun 25, 2018

Vertical Fogs on 2018, at least on my BigHorn 4x4, are 9006/HB4’s

Kinetic · Jul 15, 2018

Do they not make LED's in 5K? Every one I'm seeing is 6K or 6.5K

Kinetic · Jul 24, 2018

WTM75 said:
Using info on this forum, Boosted Motorsports and some other youtube videos, i changed out some bulbs on my 2017 Ram 1500. So far no problems!

https://www.amazon.com/gp/product/B01EJKIUP8/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Reverse Lights
Cargo Lights
3rd Brake lights

https://www.amazon.com/gp/product/B0142WSTJA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Passenger Light in back seat

https://www.amazon.com/gp/product/B071GBJ9ZH/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Fog Lights

https://www.amazon.com/gp/product/B00JRE38EA/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Map Lights
Licence Plate Lights
Wheel Well Lights

All these bulbs were plug & play, I did nothing other than plug them in and I have had no warning lights or any other problems, It has been about a month now. Thinking about doing my headlights next

The bulb you linked for the passenger rear light doesn't fit, at least in an '18. Wrong link? Theres no slot, it's a circuit board.

WTM75 · Jul 24, 2018

Kinetic said:
The bulb you linked for the passenger rear light doesn't fit, at least in an '18. Wrong link? Theres no slot, it's a circuit board.

On Boosted Motorsports video it was also a board, he shows how to change it out. On my ‘17 it was a festoon bulb. Much easier to change than a board.

Bulb list for 4th gens

Senior Member

Senior Member

Member

Indecisive Car Owner

Senior Member

Senior Member

Senior Member

Junior Member

Member

Member

Member

Senior Member

"Enjoy The Little Things"

Senior Member

Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Similar threads

Forum statistics

Share this page