Ramforums

__________________

I did this a while back and its by far the best mod. Clean, plug and play, and works great. My old 3rd gen fox box even fit under my 4th gen seats so it worked perfect. I like mygig to much to get rid of it so this was the best option.

__________________
2011 Dodge Power Wagon 5.7 Hemi Inferno Red/Black two tone - Lockpick, 12,500lbs Warn Winch, Bilstine Shocks, Lockers Fnt/Rear, Cb Radio, Wireless Warn Remote, Bushwackers, Super swamper M-16 40x14.5x20, 20" BMF Novekane Rims, Zone 2.5" level kit, HBS Steering Stabilizer, Custom Top Gun 8" lift kit

Great write up!

__________________


2011 SEMA Feature Vehicle, Truckin' Magazine
Custom painted Ram Club Member #1
Shaved Ram Club Member #1
Ram Forum After Dark Member #1
Supporting Member Club Member #1

nice write up, man that CVR is old school!!!

__________________


2011 White Ram Express, KMC Slides, Nitto 420s 22's,Extang Trifecta, GF leveling kit, KICKER sound system,CodeAlarm remote start, Retroshop Headlights, Bedrug;

I bet better. I forgot to hear it. Full range to all the 6x9s are way better. I wish I can do that to mine

__________________

Thanks for this write-up Gator! Helped me the other day when I was trying to install my lock-pick on my mygig.

__________________

for the 4th gen ram with the alpine touch screen head unit you need to order the pac chy23 and that gives you remote out and rca outs for your amplifiers and it plugs between the stock wiring harness and the stock head unit.. i picked 1 up of ebay for like $120 they usually run for like $160 and then you dont have to splice and wires it would cost over 100 for get a line out installed professionally anyways so this is something you can do yourself

my question is can somone help direct me or just inform me on how to run my rca wires from my pac module so behind the factory alpine unit to my amp under/behind the back seats... do i have to pull the carpet/panels and center console.. or do i have to drill holes in the carper and for the 4 guage going to my battery do i drill a hole in that plastic cover near the firewall its for the clutch pedal right? has anyone done this?

I will have to refrain from ordering this up right now. It seems like the perfect option for me. How you like that Kicker Amp? I haven't had a system in quite a while, feel very 'out of the loop'. I love my Comp VR 10s.

__________________
- 2011 Hemi Express RCSB -

18" Mufflex - Curt Class IV Hitch - Spray In Liner - AVS Ventshades
Morimoto D2S Retros with 6000° Headlights and 3000° Foglights