efan diy

bigtigga84 · Jan 16, 2011

lmao, well thank you very much. im quite proud of it myself............ oh wait, you ment the spanner............ my bad. busted up my knuckles good makin it, but i watched the dumb asses were i bought my truck fight with taking the fan off when they replaced the water pump seal and didn't have one(tiny ass used car dealership my grandfatherr worked at before he passed). yeah screw that lol

bigtigga84 · Jan 16, 2011

shadow11 said:
Yep i used that diy too but it would have been a lot easier if there were a lot more pics.

dunno if it makes me dumb, or just a very visual learner...... read it once and was yeah ok fukken that

shadow11 · Jan 17, 2011

bigtigga84 said:
dunno if it makes me dumb, or just a very visual learner...... read it once and was yeah ok fukken that

Yeah I do a lot better when I see lots of pics instead of just reading the directions lol

bigtigga84 · Jan 17, 2011

bigtigga84 · Jan 18, 2011

Ok having issues. Got everything wired up, turned truck on with diablo monitoring temp. Got to 195 (my stat)turned adjuster and nothing fan wouldn't come on. HELP!!!!

bigtigga84 · Jan 18, 2011

Oh yeah btw first post from droid global 2. Definitely interesting I can see this getting me in trouble at work lol

shadow11 · Jan 18, 2011

Did you test the fan to make sure it worked before you wired it all up?

bigtigga84 · Jan 18, 2011

Yep sure did. Worked like a charm

bigtigga84 · Jan 18, 2011

Just jumped it(bypassed controller through fuse holder) and it fired right up

shadow11 · Jan 18, 2011

Set the controller so the fan comes on at the coolest temp and see if it will come on.

bigtigga84 · Jan 18, 2011

Ok will do that. Was turning while truck was warming up to see if it would come on but it didn't.

bigtigga84 · Jan 18, 2011

Ofcourse I get on here and ask, look like a dip ****. Fukken thing worked

shadow11 · Jan 18, 2011

Get it dialed in to the right temp and you are set!

bigtigga84 · Jan 18, 2011

Why does **** have to mess with my emotions. It turned on, ran for ten seconds and shut back off, wont come back on

shadow11 · Jan 18, 2011

You sure its getting hot enough to turn on?

bigtigga84 · Jan 18, 2011

Engine was at 157 when I started it back up. Let it go up to 197 and shut it off

bigtigga84 · Jan 18, 2011

Either I have a 210 stat or the diablo is off 15 degrees hot. Stat opened at 210, got fan to start. Held at 199 turned it till i went off. Im willing to bet they sold me the wrong stat. It was last spring and I can't remember what the box said. Fukkers, least it works right lol.

Trupiano · Jan 18, 2011

Haha the same thing happened to me when I wired mine up. I forgot to put the fuse in! Took me like 25 mins to figure it out. Almost junked the controller lol.

shadow11 · Jan 18, 2011

Yea it just sounded like it wasn't getting hot enough to turn on.

Trupiano · Jan 18, 2011

If you ever have a problem with your controller, get this one! This guy makes the best fan controller's money can buy! It controlls the high side and the low side! So the low side comes on at whatever temp you set it to, and the high side comes on 10-15 degrees above that. It's super-badass!

http://www.dccontrol.com/fancontrol.htm

efan diy

Senior Member

Senior Member

Banned

Senior Member

Senior Member

Senior Member

Banned

Senior Member

Senior Member

Banned

Senior Member

Senior Member

Banned

Senior Member

Banned

Senior Member

Senior Member

Registered User

Banned

Registered User

Similar threads

Forum statistics

Share this page